# Service bulletin 1802416

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10218101
- Published by NHTSA: 2022\-08\-22
- Manufacturer's number: 1802416
- Manufacturer's date: 2016\-03\-11
- NHTSA component: POWER TRAIN

## NHTSA's summary

Diagnostic And System Improvements.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10218101-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10218101-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline

## Vehicles listed

- 2010 to 2011 JEEP WRANGLER

## Recalls for the same vehicles and component

- [12V216000](/recalls/nhtsa/12V216000.md), 2012-05-16: POWER TRAIN:AUTOMATIC TRANSMISSION
- [11V145000](/recalls/nhtsa/11V145000.md), 2011-03-01: POWER TRAIN:AXLE ASSEMBLY

## Other bulletins for the same vehicles and component

- [101232](/bulletins/11010205.md), 2024-11-07, Service bulletin: POWER TRAIN. Plate \- Planetary
- [V51](/bulletins/10228020.md), 2022-12-19, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [S1121000006RevA](/bulletins/10221831.md), 2022-09-26, Service bulletin: POWER TRAIN:TRANSMISSION CASE/HOUSING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. \(Revision A\) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- [9004009](/bulletins/10221097.md), 2022-09-26, Service bulletin: POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) are one\-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both \(2\) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- [0810014](/bulletins/10221047.md), 2022-09-26, Service bulletin: VISIBILITY; POWER TRAIN. Loss Of Power Heated Mirror Function \- Recall P61 Interim Repair This bulletin involves removing the M35 fuse.
- [S80](/bulletins/10219849.md), 2022-09-15, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. Customer Satisfaction Notification S80 Aftermarket Dana 60 Front Axle The aftermarket front axle steering knuckles have been machined with an incorrect taper during the manufacturing process on about 250 of the above vehicles, with approximately 80 of the axles sold by Mopar aftermarket. This condition can result in premature axle knuckle wear. The aftermarket front axle knuckles must be replaced with new axle knuckles for the left side and right side.
- [1802416REVA](/bulletins/10218100.md), 2022-08-22, Service bulletin: POWER TRAIN. Diagnostic And System Improvements.
- [S1121000006 Rev.](/bulletins/10180221.md), 2020-09-28, Service bulletin: ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. \(Revision A\) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- [V51](/bulletins/10170368.md), 2020-01-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [06\-001\-15](/bulletins/10148979.md), 2018-11-26, Service bulletin: POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER\(MOTORCYCLE\); BACK OVER PREVENTION. Squeak Noise While Depressing The Clutch Pedal This bulletin involves lubricating the clutch pedal return spring. Squeak noise from under the dash while depressing or releasing the clutch pedal.

JSON: [/v1/bulletins/10218101](/v1/bulletins/10218101)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%201802416&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10218101&vehicle=Service%20bulletin%201802416)