# Service bulletin 22\-GI\-006G

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10217310
- Published by NHTSA: 2022\-08\-05
- Manufacturer's number: 22\-GI\-006G
- Manufacturer's date: 2022\-07\-14
- NHTSA component: EQUIPMENT:OTHER:LABELS; EQUIPMENT

## NHTSA's summary

Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 \(FMVSS 110\) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 100 pounds. If the total added weight exceeds the lesser of the limit, a label \(See Figure 1\) must be added to the driver\-side B\-pillar within 25mm \(1 inch\) of the original tire placard. NOTE: Effective immediately, all ports will stop the installation of the Load Capacity Label when there are no port accessories installed.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2022/MC-10217310-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2022/MC-10217310-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Equipment and accessories, Labels and manuals

## Vehicles listed

- 2008 HYUNDAI GENESIS
- 2009 to 2016 HYUNDAI GENESIS
- 2010 to 2016 HYUNDAI GENESIS COUPE

## Other bulletins for the same vehicles and component

- [24\-01\-009H](/bulletins/10251276.md), 2024-03-05, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:ANTI\-THEFT DEVICES. This bulletin provides the service procedure to: 1\) Upgrade the IBU/BCM \(Integrated Body Control Unit/Body Control Module\) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2\) Install two anti\-theft decals for the front windows. Additional decals may also be installed in the rear windows at customer’s discretion.
- [24\-01\-009H](/bulletins/10251275.md), 2024-03-05, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:ANTI\-THEFT DEVICES. Hyundai has launched an anti\-theft software upgrade and window decal campaign \(Campaign 993\), combined with an anti\-theft steering wheel lock campaign \(Campaign P32\), and anti\-theft ignition cylinder protector campaign \(Campaign 9A5\) in response to an increase in thefts of certain 2011\-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software \(Campaign 993\), Hyundai is offering customers an anti\-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti\-theft solutions available from HMA through Hyundai dealers.
- [TXXP DBP](/bulletins/10213727.md), 2022-06-10, Service bulletin: SERVICE BRAKES, HYDRAULIC; EQUIPMENT. The warranty coverage for the hydraulic electronic control unit \(HECU\) for certain 2009\-12 Genesis \(BH\) and 2011\-12 Equus \(VI\) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
- [22\-01\-013H](/bulletins/10208866.md), 2022-03-08, Service bulletin: EQUIPMENT:OTHER:LABELS; SERVICE BRAKES, HYDRAULIC; EQUIPMENT. The brake fluid specifications labeled on the master cylinder reservoir cap and in the vehicle owner’s manual require revision to indicate DOT 4 brake fluid only. This bulletin describes the procedure to replace the master cylinder reservoir cap and apply a sticker to the owner’s manual with the revised brake fluid specification.
- [21\-EM\-004H](/bulletins/10190044.md), 2021-04-07, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- [21\-BR\-002H](/bulletins/10190038.md), 2021-04-07, Service bulletin: SERVICE BRAKES; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This bulletin provides best practice recommendations when performing brake service procedures.
- [21\-EM\-003H](/bulletins/10189989.md), 2021-04-06, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- [21\-01\-016H](/bulletins/10189985.md), 2021-04-06, Service bulletin: EQUIPMENT; SERVICE BRAKES. This bulletin describes the procedure to inspect and if necessary replace the brake tube assemblies for certain 2015MY Hyundai Genesis \(DH\) vehicles located in the non\-salt belt states. Nonsalt belt states are listed below in Applicable Vehicles.
- [21\-01\-015H](/bulletins/10189983.md), 2021-04-06, Service bulletin: SERVICE BRAKES; EQUIPMENT. This bulletin describes the procedure to replace the brake tube assemblies for certain 2015MY Hyundai Genesis \(DH\) vehicles located in the salt belt states. Salt belt states are listed below in Applicable Vehicles.
- [20\-DS\-002H](/bulletins/10180995.md), 2020-10-08, Service bulletin: POWER TRAIN; EQUIPMENT. The bulletin describes the procedure to measure and set propeller shaft angles to optimize driveline vibration performance on certain 2015\-2016MY 3.8L AWD G80 \(DH\) vehicles.

JSON: [/v1/bulletins/10217310](/v1/bulletins/10217310)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2022-GI-006G&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10217310&vehicle=Service%20bulletin%2022-GI-006G)