# Service bulletin 18\-031\-12 REV. A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10216389
- Published by NHTSA: 2022\-07\-25
- Manufacturer's number: 18\-031\-12 REV. A
- Manufacturer's date: 2012\-12\-15
- NHTSA component: BACK OVER PREVENTION; ELECTRICAL SYSTEM; SERVICE BRAKES; EXTERIOR LIGHTING

## NHTSA's summary

Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that P0108 \- Manifold Absolute Pressure Sensor Circuit High has been set active or stored.Updating the software will correct the condition listed above.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2012/MC-10216389-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2012/MC-10216389-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes, Driver assistance, Electrical system, Lighting, Backup camera

## Trouble codes named

P0108

## Vehicles listed

- 2011 CHRYSLER 300C
- 2012 CHRYSLER 300C
- 2011 to 2012 DODGE CHALLENGER
- 2011 to 2012 DODGE CHARGER

## Other bulletins for the same vehicles and component

- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [2102016](/bulletins/10228120.md), 2022-12-19, Service bulletin: EQUIPMENT; BACK OVER PREVENTION; POWER TRAIN. Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
- [55111275A](/bulletins/10221558.md), 2022-09-26, Service bulletin: AIR BAGS; BACK OVER PREVENTION. Sun Sensor Multi zone Auto Climate Control systems. Left and right outlet temperatures do not match when system is in "sync" . Occupants will experience being cold \( winter time\), on either passenger or driver side, even though the temperature setting is the same. Root cause: Suspect sun senors \( PN 55111274AA and 55111275AA\). THERE WILL BE NO DTC FOR THE SUN SENSOR active or stored. The issue is diagnosed by using an INCANDESCENT \(not LED\) shop lamp. Shine the shop lamp on the left side of the sensor, then on the right side of the sensor, while monitoring sensor output with STARSCAN. The reading should change from 0 \(or near zero\) to about 20 to 40. The important thing is that the left and right readings are the same, and that they change when the lamp is shone on it.
- [02\-007\-14](/bulletins/10218205.md), 2022-08-22, Service bulletin: BACK OVER PREVENTION; SUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); WHEELS. Front End Clunk Noise When Coming To A Stop \- Police Vehicles Only This bulletin involves replacing the left side or the right side or both side tension struts. Police vehicles with heavy duty suspension and rear wheel drive may experience a front end clunk noise, coming from the tension strut bushing\(s\), while coming to a stop.
- [02\-008\-14](/bulletins/10218201.md), 2022-08-22, Service bulletin: SUSPENSION; BACK OVER PREVENTION. Front End Clunk Noise When Coming To A Stop \- Mexico Only This bulletin involves replacing both the left and right side front tension struts The customer may experience a front end clunk noise, coming from the tension strut bushing\(s\), when coming to a stop.
- [23\-004\-13](/bulletins/10189394.md), 2021-03-29, Service bulletin: VEHICLE SPEED CONTROL; BACK OVER PREVENTION. Right And/Or Left Rear Door Contacts Inner Quarter Panel This bulletin involves inspecting and if necessary installing a new rear door bumper stop. Right and/or left rear door contacts inner quarter panel.
- [9002503](/bulletins/10139594.md), 2018-06-11, Service bulletin: EQUIPMENT; POWER TRAIN; BACK OVER PREVENTION; VISIBILITY; SUSPENSION; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Part Description: RHR Radio Issue Description: Issue 1: While performing RHR radio reflash \(software update\), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality \(examples may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.\). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the following:\~ 1. Power on radio\~2. Press MENU H/K\~3. Press System Setup S/K\~4. Press Manage HDD S/K\~5. Press Display Available Space on HDD S/K\~6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes\~ Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg \& .jpg files are supported. Remove all other file types and reevaluate the concern. \~ Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect

JSON: [/v1/bulletins/10216389](/v1/bulletins/10216389)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2018-031-12%20REV.%20A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10216389&vehicle=Service%20bulletin%2018-031-12%20REV.%20A)