# Service bulletin S2108000025 Rev.

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10215905
- Published by NHTSA: 2022\-07\-18
- Manufacturer's number: S2108000025 Rev.
- Manufacturer's date: 2021\-01\-28
- NHTSA component: BACK OVER PREVENTION

## NHTSA's summary

CEL Check Engine Lamp On, DTC P0158 O2 Sensor 2/2 Circuit High

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10215905-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10215905-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Trouble codes named

P0158

## Vehicles listed

- 2019 to 2020 JEEP WRANGLER
- 2019 to 2021 RAM 1500

## Recalls for the same vehicles and component

- [24V676000](/recalls/nhtsa/24V676000.md), 2024-09-12: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EXTERIOR LIGHTING:BRAKE LIGHTS
- [23V059000](/recalls/nhtsa/23V059000.md), 2023-02-09: BACK OVER PREVENTION:DISPLAY FUNCTION
- [22V638000](/recalls/nhtsa/22V638000.md), 2022-08-25: BACK OVER PREVENTION:DISPLAY FUNCTION
- [21V918000](/recalls/nhtsa/21V918000.md), 2021-11-23: STEERING:STEERING CONTROL MODULE; BACK OVER PREVENTION:DISPLAY FUNCTION
- [21V438000](/recalls/nhtsa/21V438000.md), 2021-06-10: BACK OVER PREVENTION:DISPLAY FUNCTION
- [20V191000](/recalls/nhtsa/20V191000.md), 2020-09-10: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [96C Combo](/bulletins/11023334.md), 2025-09-24, Service campaign: ELECTRICAL SYSTEM; BACK OVER PREVENTION: WARNINGS. Customer Satisfaction Notification 96C – Park Assis Module \- Dealer Notification
- [103289](/bulletins/11014887.md), 2025-03-04, Service bulletin: BACK OVER PREVENTION: WARNINGS; LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA \- REAR VIEW
- [S2208000045 REV.B](/bulletins/11011774.md), 2024-12-11, Service bulletin: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING. Backup Camera Poor Image Quality Inspection
- [0803224](/bulletins/10251879.md), 2024-03-18, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Battery Pack Control Module \(BPCM\) Software Update Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes \(DTC\)s have been set: ? P0AC0 \- Hybrid Battery Pack Current Sensor 1 Circuit Performance. ? P1A29 \- Cell Supervisory Circuit A Failure. ? P0DE7 \- Hybrid/EV Battery Pack Cell Voltage High. ? P0ABA \- Voltage Sense A Circuit. ? P0B3D \- Hybrid Battery Voltage Sense "A" Circuit Low. ? P0B3E \- Hybrid Battery Voltage Sense "A" Circuit High. ? U3017 \- Control Module Timer/Clock Performance. ? P0E55 \- DC/DC Converter Current Sensor Circuit "A". ? P0DAF \- Hybrid/EV Battery Cell Balancing Circuit "A". ? P0AD4 \- Hybrid Battery Pack Air Flow System Insufficient Air Flow. This bulletin involves updating the BPCM with the latest available software.
- [0300224](/bulletins/10251863.md), 2024-03-18, Service bulletin: EXTERIOR LIGHTING; BACK OVER PREVENTION. Front and Rear Axle Sensor Kit \*\*Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code \(DTC\) has been set: ? C1451\-11 \- Service Axle Locker System\*\* Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center \(EVIC\) for this condition.
- [0900124](/bulletins/10251862.md), 2024-03-18, Service bulletin: BACK OVER PREVENTION. Cold Engine Ticking Noise The customer may describe a ticking noise from the exhaust manifold location\(s\) when cold. This bulletin involves replacing the exhaust manifolds.
- [S2319000007](/bulletins/10248550.md), 2024-01-08, Service bulletin: BACK OVER PREVENTION; STEERING:CRITICAL FASTENERS; STEERING. Squeak Noise From Dash Area When Turning The Steering Wheel.
- [0806423](/bulletins/10248049.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Radio Over The Air Updating to QR40.12 Software Version Mobile Wi\-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone, when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air \(FOTA\) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from QR39.7 to QR40.12. NOTE: National launch for this FOTA update is expected to begin March 10, 2023. DISCUSSION: Vehicles sold in the U.S. and Canada can now receive software updates ?over\-the\-air?. Updates to software will occur in a phased roll\-out. The software is updated through the built\-in cellular modem in the radio.
- [0804523](/bulletins/10248014.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Radio Over The Air Updating to 34.42 Software Version ? Mobile Wi\-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air \(FOTA\) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 34.4 to 34.42.
- [1801623](/bulletins/10247996.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\). Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more ofthe following DTCs:P0335 \- Crankshaft Position Sensor Circuit. P0339 \- Crankshaft Position Sensor Intermittent. Other software enhancement included with this update: Idle stability improvements during Electronic Stability Control \(ESC\) events.

JSON: [/v1/bulletins/10215905](/v1/bulletins/10215905)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20S2108000025%20Rev.&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10215905&vehicle=Service%20bulletin%20S2108000025%20Rev.)