# Service bulletin S2108000018

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10215885
- Published by NHTSA: 2022\-07\-18
- Manufacturer's number: S2108000018
- Manufacturer's date: 2021\-01\-21
- NHTSA component: BACK OVER PREVENTION

## NHTSA's summary

Interior Camera Module, ICM1, Red On wiTECH Topology

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10215885-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10215885-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2021 CHRYSLER PACIFICA

## Recalls for the same vehicles and component

- [24V436000](/recalls/nhtsa/24V436000.md), 2024-06-13: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [S2208000045 REV.B](/bulletins/11011774.md), 2024-12-11, Service bulletin: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING. Backup Camera Poor Image Quality Inspection
- [9004452](/bulletins/10248516.md), 2024-01-08, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. CAMERA, Rear View Prior to replacement, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
- [S2108000015](/bulletins/10247955.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. Uconnect Box Require Service Message
- [S1408000384](/bulletins/10247948.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION; LANE DEPARTURE. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor \(IBS\) State of Charge \(SOC\) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes \(DTCs\), or Battery Warning Lamp On
- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [S238A000047](/bulletins/10247435.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. Humming Noise Through Speakers While Vehicle Is Off
- [9004452](/bulletins/10244355.md), 2023-10-30, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. CAMERA, Rear View Prior to replacement, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
- [9100133](/bulletins/10239854.md), 2023-07-31, Service bulletin: BACK OVER PREVENTION. ROCKER ARM ASSY \- ROLLER ROCKER Case 1.\- Before replacing the intake or exhaust rocker arms due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head \(no need to replace rocker arms\). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes \(DTC\)s present. Case 2.\- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile \(Rocker arm: slider, Camshaft: central lobe\), replace the intake camshaft \(1\) in that cylinder head and all intake rocker arms \(6\).
- [S1623000028 Rev.](/bulletins/10231735.md), 2023-02-13, Service bulletin: VEHICLE SPEED CONTROL; BACK OVER PREVENTION; POWER TRAIN; VISIBILITY; PARKING BRAKE. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- [1805121](/bulletins/10230133.md), 2023-01-17, Service bulletin: POWER TRAIN; EXTERIOR LIGHTING; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes \(DTCs\) have been set: P1AC6\-00 \- MCPA Crankshaft Position Signal Sensor Performance. P0335 \- Crankshaft Position Sensor Circuit. P0339 \- Crankshaft Position Sensor Intermittent. P0031 \- O2 Sensor 1/1 Heater Circuit Low. P0032 \- O2 Sensor 1/1 Heater Circuit High. P0037 \- O2 Sensor 1/2 Heater Circuit Low. P0038 \- O2\-Sensor 1/2 Heater Circuit High. P0051 \- O2\-Sensor 2/1 Heater Circuit Low. P0052 \- O2\-Sensor 2/1 Heater Circuit High. P0057 \- O2 Sensor 2/2 Heater Circuit Low. P0058 \- O2\-Sensor 2/2 Heater Circuit High. The following modules need to be flashed for this update to be effective, the following modules are all to be updated along with this PCM update:Hybrid Control Processor \(HCP\) and Auxiliary Hybrid Control Processor \(AHCP\) or also known as Power Inverter Module \(PIM\).

JSON: [/v1/bulletins/10215885](/v1/bulletins/10215885)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20S2108000018&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10215885&vehicle=Service%20bulletin%20S2108000018)