Service bulletin S2123000002
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10215858 |
| Published by NHTSA | 2022-07-18 |
| Manufacturer's number | S2123000002 |
| Manufacturer's date | 2021-01-12 |
| NHTSA component | EQUIPMENT; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR |
NHTSA's summary
Exterior Rearview Mirrors Inoperative And Or Intermittent Operation.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Equipment and accessories, Glass, wipers and mirrors, Mirrors
| JEEP GLADIATOR | 2020, 2021 |
|---|---|
| JEEP WRANGLER | 2018, 2019, 2020, 2021 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 9100209 | 2024-01-08. Service bulletin. Switch-Mirror Before replacing this Switch, please follow the service procedures to properly diagnose it 1) Remove the switch 2) Please check the continuity on each pin of the switch based on the table found in the service Procedures. If after testing switch is still faulty, please call FCA Redacted Content. If no response after 15 minutes, proceeds with switch replacement. |
|---|---|
| 9100142 | 2023-05-30. Service bulletin. Mirror |
| S2108000118 | 2023-01-17. Service bulletin. Power Mirrors Are Inoperative |
| S2108000118 | 2022-10-17. Service bulletin. Power Mirrors Are Inoperative |
| S2023000011 | 2022-10-17. Service bulletin. Wind Noise And Or Gap At Front Door Mirror Flag |
| S2108000118 | 2022-10-17. Service bulletin. Power Mirrors Are Inoperative |
| 9004017 | 2022-09-26. Service bulletin. CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order. |