# Service bulletin 1811315

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10215186
- Published by NHTSA: 2022\-07\-05
- Manufacturer's number: 1811315
- Manufacturer's date: 2015\-12\-24
- NHTSA component: POWER TRAIN

## NHTSA's summary

Flash: Powertrain Diagnostic And System Improvements.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2015/MC-10215186-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2015/MC-10215186-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline

## Vehicles listed

- 2013 CHRYSLER GRAND VOYAGER
- 2013 DODGE DURANGO

## Other bulletins for the same vehicles and component

- [101232](/bulletins/11010205.md), 2024-11-07, Service bulletin: POWER TRAIN. Plate \- Planetary
- [2101414](/bulletins/10229859.md), 2023-01-17, Service bulletin: POWER TRAIN. Transmission Shift Enhancements
- [1802614](/bulletins/10229849.md), 2023-01-17, Service bulletin: POWER TRAIN. Powertrain System Improvements/Enhancements
- [2103515](/bulletins/10229245.md), 2023-01-09, Service bulletin: POWER TRAIN. Flash: Transmission Shift Enhancements This bulletin involves selectively erasing and reprogramming the Transmission Control Module \(TCM\) with new software.
- [V51](/bulletins/10228020.md), 2022-12-19, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [S1821000001](/bulletins/10221150.md), 2022-09-26, Service bulletin: POWER TRAIN. Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
- [9004009](/bulletins/10221097.md), 2022-09-26, Service bulletin: POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) are one\-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both \(2\) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- [21\-014\-14](/bulletins/10218812.md), 2022-08-29, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; TRAILER HITCHES; POWER TRAIN. Flash: Transmission Shift Enhancements This bulletin involves selectively erasing and reprogramming the Transmission Control Module \(TCM\) with new software. NOTE: This bulletin applies to the following vehicles: • Wrangler vehicles equipped with the WA580 Automatic Transmission \(Sales Code DGJ\) • Challenger vehicles equipped with either the 3.6L engine \(Sales Code ERB\) or the 6.4L Engine \(Sales Code ESH or ESG\) and the WA580 Automatic Transmission \(.Sales Code DGJ\) • Durango vehicles equipped with the 3.6L engine \(Sales Code ERB\) and the WA580 Automatic Transmission \(Sales Code DGJ\) • Grand Cherokee vehicles equipped with the 6.4L engine \(Sales Code ESG\) for all markets except Australia \(Sales Code 8AL\) or the 3.6L engine \(Sales Code ERB\) \(All Markets\) and the WA580 Automatic Transmission \(Sales Code DGJ\). Australian vehicles equipped with the 6.4L can refer to Service Bulletin 21\-010\-14
- [18\-026\-14](/bulletins/10218786.md), 2022-08-29, Service bulletin: POWER TRAIN. Flash: Powertrain System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The following powertrain system improvements/enhancements are included in this software release: Automatic Oil Change Indicator\(AOCI\) system enhancements that force the use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicle duty cycle information used in the AOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message.
- [1811315](/bulletins/10218152.md), 2022-08-22, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM. Flash: Powertrain Diagnostic And System Improvements.

JSON: [/v1/bulletins/10215186](/v1/bulletins/10215186)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%201811315&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10215186&vehicle=Service%20bulletin%201811315)