Service bulletin Message 140046
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10213476 |
| Published by NHTSA | 2022-06-06 |
| Manufacturer's number | Message 140046 |
| Manufacturer's date | 2022-05-04 |
| NHTSA component | WHEELS |
NHTSA's summary
Message and alert to all dealer RYKER mandatory certification form The front wheel installation is a critical operation and must be performed as explained in the PDI bulletin.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Wheels
| CAN-AM RYKER | 2019, 2020, 2021, 2022 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2020489 | 2020-10-19. Wheels |
|---|---|
| 2020487 | 2020-10-16. Wheels |
| 20V632000 | 2020-10-14. WHEELS:LUGS/NUTS/BOLTS/STUDS; WHEELS |
| 2019478 | 2019-09-27. Wheels |
| 19V683000 | 2019-09-27. WHEELS:LUGS/NUTS/BOLTS/STUDS |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| Quality Bulletin 2024-12 | 2025-03-21. Service bulletin. Ryker Vehicle Stability System (VSS) Issues Variation in the front wheel alignment process on the production line can have an influence on the Vehicle Stability System (VSS) activation. |
|---|---|
| Message 139755 | 2022-03-08. Service bulletin. The front wheels guided studs might be broken from the factory on MY22 Rykers. These studs are required (all 3) and need to bealigned in the front brake rotor holes. If a stud is found broken, the wheel needs to be replaced. |
| 2020-6 | 2020-11-03. Service bulletin. Safety Campaign- Possible Front Wheel Loss. The front wheel assembly may not have been performed properly (torque application and installation of the red locking clip). |
| 2020-1 Revision | 2020-11-03. Service bulletin. Safety Campaign Revision- Wheel nut may crack. One or more wheel nuts may crack resulting in a reduced clamping force. New VINs added in the warranty campaign and new steps in the procedure. |
| 2020-1 | 2019-11-05. Service bulletin. One or more wheel nuts may crack resulting in a reduced clamping force. This could eventually affect the integrity of the wheel assembly and the vehicle's behavior. This may increase the risk of a crash. |
| 2019-3 | 2019-05-20. Service bulletin. Service Bulletin no 2019-3 On-Road Ryker- Importance of Wheel Installation Procedures |