WenmarOpen by Wenmar Pro

Service bulletin 22-BD-006H

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10211672
Published by NHTSA2022-05-10
Manufacturer's number22-BD-006H
Manufacturer's date2022-04-12
NHTSA componentEXTERIOR LIGHTING

NHTSA's summary

Certain 2022MY Tucson (NX4/NX4a) and Tucson Hybrid (NX4 HEV) vehicles equipped with LED type lamps may exhibit loose license plate lamps, caused by out of specification lamp housings. This bulletin provides the procedures to repair the condition by replacing the affected license plate lamps.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Lighting

Vehicles listed
HYUNDAI TUCSON2022
HYUNDAI TUCSON HYBRID2022 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
21V9380002021-12-02. ELECTRICAL SYSTEM:SOFTWARE; EXTERIOR LIGHTING
20213572021-06-08. Lights And Instruments

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
26-AD-001H TSB2026-03-07. Service bulletin. Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
25-BD-012H TSB2025-11-12. Service bulletin. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
22-BD-002H2022-04-08. Service bulletin. Certain 2022MY Tucson (NX4a) vehicles may exhibit excessive moisture in the rear center combination lamp. This bulletin describes the procedure to inspect the rear center combination lamp and repair or replace it if necessary.