# Service bulletin LI30.36\-N\-073937

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10203868
- Published by NHTSA: 2021\-12\-03
- Manufacturer's number: LI30.36\-N\-073937
- Manufacturer's date: 2021\-11\-22
- NHTSA component: ELECTRICAL SYSTEM

## NHTSA's summary

"MY10\-12 906 Sprinter: Maximum vehicle speed limit changed after Approved Emission Modification \(AEM\) Campaign"

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10203868-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10203868-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system

## Vehicles listed

- 2010 to 2011 MERCEDES\-BENZ SPRINTER 906

## Other bulletins for the same vehicles and component

- [LI00.19\-N\-075749](/bulletins/10231020.md), 2023-02-03, Service bulletin: ELECTRICAL SYSTEM. Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming.
- [LI54.22\-N\-074063](/bulletins/10206073.md), 2022-01-06, Service bulletin: ELECTRICAL SYSTEM. Various complaints due to aftermarket OBDII device installed
- [LI00.30\-N\-074118](/bulletins/10206072.md), 2022-01-06, Service bulletin: ELECTRICAL SYSTEM. "The “monitor status this driving cycle \(PID 41\)” can be displayed as “disabled” in the generic scan tool although no monitor of this group is disabled "
- [LI2700N048696](/bulletins/10205155.md), 2021-12-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:SEALS/GASKETS; POWER TRAIN; ELECTRICAL SYSTEM. Automatic transmission oil loss in area of electrical connection and oil pan gasket.
- [LI47 00\-N\-067942](/bulletins/10144114.md), 2018-09-04, Service bulletin: FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES; ELECTRICAL SYSTEM:SOFTWARE. Check Engine Light Illuminated with Stored Fault Code P008700 in ME Control Unit N3/34 and or P008A00 in FSCU N118
- [V\-B\-00.00\-08](/bulletins/10135854.md), 2018-05-07, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Software\-Based Retrofits
- [LI49.20\-N\-060525](/bulletins/10135849.md), 2018-05-07, Service bulletin: ELECTRICAL SYSTEM. Engine indicator lamp lights up, fault code P245900, P245994, P246364 or P246385 in CDI control unit
- [LI14.40\-N\-061091](/bulletins/10135812.md), 2018-05-07, Service bulletin: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Check engine light on with one or more of the following DTCs P18B800, P18B900
- [LI54.21\-N\-059919](/bulletins/10135614.md), 2018-05-07, Service bulletin: ELECTRICAL SYSTEM:IGNITION. Remote engine start via external starter switch sporadically not possible, fault code B150B
- [14CSA22](/bulletins/10124131.md), 2017-11-17, Service bulletin: ELECTRICAL SYSTEM:WIRING. 14CSA22 DTNA Chassis Wiring Diagrams

JSON: [/v1/bulletins/10203868](/v1/bulletins/10203868)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI30.36-N-073937&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10203868&vehicle=Service%20bulletin%20LI30.36-N-073937)