# Service bulletin TSB\_SST067\_R1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10203695
- Published by NHTSA: 2021\-12\-01
- Manufacturer's number: TSB\_SST067\_R1
- Manufacturer's date: 2021\-11\-04
- NHTSA component: ENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

This bulletin provides information regarding test procedure of the Bearing Clearance Tester \(BCT\) Special Service Tool \(SST\). The SST comes pre\-calibrated from the supplier however, in some cases, due to variable shop compressor air pressure, the SST may need to be re\-calibrated to ensure that the tool provides accurate readings when testing the engine rod bearing wear. The calibration and BCT measuring point maintenance is included in this bulletin.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10203695-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10203695-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Engine, Equipment and accessories, Instrument cluster

## Vehicles listed

- 2011 to 2019 KIA OPTIMA
- 2011 to 2019 KIA SORENTO
- 2011 to 2019 KIA SPORTAGE

## Other bulletins for the same vehicles and component

- [PS613](/bulletins/10162043.md), 2019-07-11, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. PITSTOP: INSTRUMENT CLUSTER REPLACEMENT, MILEAGE SETTING WITH KDS \- This publication provides the KDS service procedure for mileage setting on the listed vehicles with newly replaced instrument clusters.
- [TSBTRA072A\_R2](/bulletins/10130105.md), 2018-03-13, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:STARTER ASSEMBLY. TSB \- SERVICE ACTION: INHIBITOR SWITCH \- REPLACEMENT \(SA317A\) \- This bulletin has been revised to include additional information. \- This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima \(JFa\), Sorento \(UMa\), Optima Hybrid \(HEV\), Optima Plug\-in Hybrid \(PHEV\), Sportage \(QL\), Forte \(YD\), and Sedona \(YP\), and some 2016\-2017MY Optima \(JF\) vehicles, equipped with a front wheel drive 6\-speed transmission, which may experience the following concerns: ? Malfunction Indicator Lamp \(MIL\) ON with DTC P0705 \- Transmission Range Sensor \(TRS\) Circuit Malfunction \(active or history\) ? CAN\-related DTCs \(For both Hybrids: CAN DTC C2243\); ? Intermittent no crank/no start ? Erratic or harsh shifting; ? EPB and Hold lights illuminated intermittently; ? ?Key OFF? indicated after placing the selector lever into the ?P? position and depressing the Start/Stop button.Note: When this condition occurs, the ?P? position is not indicated on the instrument cluster.
- [TSB\-ELE106](/bulletins/10109826.md), 2017-08-02, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE. TSB: INSTRUMENT CLUSTER REPLACEMENT, SOFWARE UPGRADE AND MILEAGE SETTING \- This bulletin provides the procedure to perform a software upgrade and mileage setting on 2015MY\~ Sedona \(YP\), 2016MY\~ Sorento \(UMa\), and 2017MY\~ Forte \(YD, YDm\) vehicles with newly replaced instrument clusters.
- [TSB\-ELE057R3](/bulletins/10109755.md), 2017-08-02, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. TSB: SERVICE ACTION: BCM UPGRADE \- IPM LOGIC IMPROVEMENT \(SA163A\) \- This bulletin provides information related to a software upgrade for the Instrument Panel Module \(IPM\) of some 2014MY Sorento \(XMa\) vehicles, produced from January 22, 2013 through November 15, 2013 and equipped with a Power Tail Gate \(PTG\), which may exhibit an intermittent parasitic draw of up to 400mA.
- [TSB\-ELE057R2](/bulletins/10109623.md), 2017-08-02, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. TSB: BCM UPGRADE \- IPM LOGIC IMPROVEMENT \- This bulletin provides information related to a software upgrade for the Instrument Panel Module \(IPM\) of some 2014MY Sorento \(XMa\) vehicles, produced from January 22, 2013 to November 15, 2013, and equipped with a Power Tail Gate \(PTG\) which may exhibit an intermittent parasitic draw of up to 400mA. To correct this condition, the BCM should be reprogrammed using the GDS download, as described in this bulletin.
- [057\-REV2A](/bulletins/10072917.md), 2016-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

JSON: [/v1/bulletins/10203695](/v1/bulletins/10203695)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB_SST067_R1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10203695&vehicle=Service%20bulletin%20TSB_SST067_R1)
