Service bulletin TSB-21-13-003
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10203248 |
| Published by NHTSA | 2021-11-06 |
| Manufacturer's number | TSB-21-13-003 |
| Manufacturer's date | 2021-10-05 |
| NHTSA component | FUEL SYSTEM, GASOLINE |
NHTSA's summary
This Technical Service Bulletin was sent to dealers updating content for the Fuel Supply section of the affected Service Manuals.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Fuel system
| MITSUBISHI ECLIPSE | 2021 to 2022 |
|---|---|
| MITSUBISHI ECLIPSE CROSS | 2018, 2019, 2020 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TT194 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
|---|---|
| TT193 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
| TT192 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
| TT217 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
| TSB-19-17-001 | 2020-01-13. Service bulletin. This is a TSB that was sent to dealers to inform them that customers may report a fuel smell coming from the HVAC vents when the engine is ON and recirculation mode is OFF. This may be caused by some fuel residue in the inside wall of the breather hose permeating through the outside of the hose. This TSB instructs dealers to replace the breather hose and the vacuum pipe and hose assembly. |
| TSB-19-13-002 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin sent to dealers. The bulletin instructs dealers to reprogram the Engine ECU with updated software to correct an issue when affected vehicle's engine stalling in cold weather conditions. If the vehicle's gas tank is filled with winter blend fuel, the issue may occur after a cold engine start, turning the key off, restarting the engine, shifting to D (Drive) range then tapping acceleration pedal. This issue may be due to inappropriate fuel correction data after engine restart, where the Air/Fuel (a/F) ratio becomes rich. |
| TSB-19-13-001 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Direct Fuel Injector and Multiport Fuel Injection (DFI and MFI) section of the affected Service Manuals to correct the Fuel Rail and Fuel Injector (High Pressure) removal and installation procedure. |
| TSB-19-11-001 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Engine Overhaul section of the affected Service Manuals to revise the Injector (High Pressure) removal and installation procedure. |