# Service bulletin FTL NC3DREZAHA R

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10202548
- Published by NHTSA: 2021\-10\-25
- Manufacturer's number: FTL NC3DREZAHA R
- Manufacturer's date: 2021\-08\-05
- NHTSA component: WHEELS

## NHTSA's summary

Replace Wheel Speed Sensors

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10202548-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10202548-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Wheels

## Vehicles listed

- 2015 to 2018 MERCEDES\-BENZ SPRINTER 1500
- 2012 to 2018 MERCEDES\-BENZ SPRINTER 2500
- 2012 to 2018 MERCEDES\-BENZ SPRINTER 3500
- 2015 to 2018 MERCEDES\-BENZ SPRINTER 4500

## Other bulletins for the same vehicles and component

- [MB NC3DREZAHA Re](/bulletins/10202549.md), 2021-10-25, Service bulletin: WHEELS. Replace Wheel Speed Sensors
- [Initial NCU\-Rear](/bulletins/10189037.md), 2021-03-15, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; WHEELS. Rear Wheel Speed Sensor \(RV\)
- [TSB 16\-001](/bulletins/10093041.md), 2017-02-27, Service bulletin: WHEELS:LUGS/NUTS/BOLTS/STUDS. IN 2016, MERCEDES\-BENZ RELEASED A NEW 2\-PC FLANGE NUT WHEEL FASTENER \(MERCEDES\-BENZ P/N A 000 990 53 53\) WHICH IS TALLER AND HAS A LARGER WASHER DIAMETER THAN THE PREVIOUS 2\-PC FLANGE NUT \(MERCEDES\-BENZ P/N A 000 401 18 72\) USED FOR MODEL YEARS 2007\-2015. DUE TO THE CHANGE IN HEIGHT OF THE 2\-PC FLANGE NUT, ALCOA WHEEL P/N 25080X CANNOT BE USED IN BOTH THE OUTER REAR DUAL POSITION AND INNER REAR DUAL POSITION WITH THE NEW 2\-PC FLANGE NUT AS THIS CREATES A SUB\-FLUSH THREAD ENGAGEMENT CONDITION. IT IS RECOMMENDED THAT 2\-PC FLANGE NUTS ARE AT LEAST FLUSH WITH THE END OF THE STUD. THIS COMMUNICATION EXPLAINS HOW ONLY ONE ALCOA WHEEL \(P/N 25080X\) MAY BE USED IN THE DUAL CONFIGURATION TO PROVIDE ADEQUATE THREAD ENGAGEMENT AND FASTENING OF OUR WHEEL.
- [V\-B\-00.00/03](/bulletins/10059872.md), 2016-03-16, Service bulletin: EQUIPMENT; WHEELS:LUGS/NUTS/BOLTS/STUDS. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
- [2015020005](/bulletins/10057718.md), 2015-06-23, Service bulletin: WHEELS:LUGS/NUTS/BOLTS/STUDS. MERCEDES BENZ: MODEL 906 SPRINTER MODEL YEAR 2015 : INFORMATION REGARDING SCREW ON B\-PILLAR ABUTTING WEDGE NEEDS REPLACED, B\- PILLAR WEDGES DOES NOT MEET CORROSION PROTECTION. \*LJ

JSON: [/v1/bulletins/10202548](/v1/bulletins/10202548)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20FTL%20NC3DREZAHA%20R&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10202548&vehicle=Service%20bulletin%20FTL%20NC3DREZAHA%20R)