Service bulletin FTL NC3DREZAHA R
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10202548 |
| Published by NHTSA | 2021-10-25 |
| Manufacturer's number | FTL NC3DREZAHA R |
| Manufacturer's date | 2021-08-05 |
| NHTSA component | WHEELS |
NHTSA's summary
Replace Wheel Speed Sensors
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Wheels
| MERCEDES-BENZ SPRINTER 1500 | 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
|---|---|
| MERCEDES-BENZ SPRINTER 2500 | 2012, 2013, 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
| MERCEDES-BENZ SPRINTER 3500 | 2012, 2013, 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
| MERCEDES-BENZ SPRINTER 4500 | 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| MB NC3DREZAHA Re | 2021-10-25. Service bulletin. Replace Wheel Speed Sensors |
|---|---|
| Initial NCU-Rear | 2021-03-15. Service bulletin. Rear Wheel Speed Sensor (RV) |
| TSB 16-001 | 2017-02-27. Service bulletin. IN 2016, MERCEDES-BENZ RELEASED A NEW 2-PC FLANGE NUT WHEEL FASTENER (MERCEDES-BENZ P/N A 000 990 53 53) WHICH IS TALLER AND HAS A LARGER WASHER DIAMETER THAN THE PREVIOUS 2-PC FLANGE NUT (MERCEDES-BENZ P/N A 000 401 18 72) USED FOR MODEL YEARS 2007-2015. DUE TO THE CHANGE IN HEIGHT OF THE 2-PC FLANGE NUT, ALCOA WHEEL P/N 25080X CANNOT BE USED IN BOTH THE OUTER REAR DUAL POSITION AND INNER REAR DUAL POSITION WITH THE NEW 2-PC FLANGE NUT AS THIS CREATES A SUB-FLUSH THREAD ENGAGEMENT CONDITION. IT IS RECOMMENDED THAT 2-PC FLANGE NUTS ARE AT LEAST FLUSH WITH THE END OF THE STUD. THIS COMMUNICATION EXPLAINS HOW ONLY ONE ALCOA WHEEL (P/N 25080X) MAY BE USED IN THE DUAL CONFIGURATION TO PROVIDE ADEQUATE THREAD ENGAGEMENT AND FASTENING OF OUR WHEEL. |
| V-B-00.00/03 | 2016-03-16. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 2015020005 | 2015-06-23. Service bulletin. MERCEDES BENZ: MODEL 906 SPRINTER MODEL YEAR 2015 : INFORMATION REGARDING SCREW ON B-PILLAR ABUTTING WEDGE NEEDS REPLACED, B- PILLAR WEDGES DOES NOT MEET CORROSION PROTECTION. *LJ |