Service bulletin TSB_CHA111
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10202227 |
| Published by NHTSA | 2021-10-22 |
| Manufacturer's number | TSB_CHA111 |
| Manufacturer's date | 2021-10-06 |
| NHTSA component | STEERING |
NHTSA's summary
TECHNICAL SERVICE BULLETIN: REPLACEMENT OF MOBIS C-MDPS SMALL BEARING - This bulletin provides the procedure to replace the small bearing of the Column Motor Driven Power Steering (C-MDPS) unit on the vehicles listed below, which may exhibit an abnormal noise when steering left and right. This may be caused by foreign substances in the MDPS worm shaft small bearing. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Small Bearing and does not affect the steering effort.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Steering
| KIA CADENZA | 2018, 2019, 2020 |
|---|---|
| KIA CADENZA | 2021 |
| KIA FORTE | 2018, 2019, 2020, 2021 |
| KIA K5 | 2021 |
| KIA NIRO | 2018, 2019, 2020, 2021 |
| KIA NIRO EV | 2019, 2020, 2021 (the catalog's model; the bulletin names a series or trim of it) |
| KIA NIRO PHEV | 2018 (the catalog's model; the bulletin names a series or trim of it) |
| KIA NIRO PHEV | 2020, 2021 (the catalog's model; the bulletin names a series or trim of it) |
| KIA NIRO PLUG-IN HYBRID | 2019 (the catalog's model; the bulletin names a series or trim of it) |
| KIA OPTIMA | 2018, 2019, 2020 |
| KIA OPTIMA HYBRID | 2018, 2019, 2020 (the catalog's model; the bulletin names a series or trim of it) |
| KIA OPTIMA PHEV | 2018, 2019, 2020 (the catalog's model; the bulletin names a series or trim of it) |
| KIA SORENTO | 2018, 2019, 2020 |
| KIA SOUL | 2018, 2019 |
| KIA SOUL EV | 2018, 2019 (the catalog's model; the bulletin names a series or trim of it) |
| KIA redundant NIRO | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2022238 | 2022-05-06. Steering |
|---|---|
| 22V304000 | 2022-05-05. STEERING:COLUMN |
| 2021374 | 2021-06-15. Steering |
| 21V447000 | 2021-06-14. LANE DEPARTURE: LANE KEEP: STEERING ASSIST; STEERING |
| 2018533 | 2018-09-26. Steering |
| 18V656000 | 2018-09-21. STEERING:ELECTRIC POWER ASSIST SYSTEM; STEERING:COLUMN |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| CS2311_TSB_R3 | 2024-10-23. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
|---|---|
| CS2311_TSB_R2 | 2024-03-02. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
| CS2311_TSB_R1 | 2024-01-06. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 15, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
| CS2311_TSB | 2024-01-06. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 13, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
| PS750 | 2023-10-01. Service bulletin. PITSTOP: AWD SYSTEM CONCERN DUE TO TIRE CIRCUMFERENCE - This Pitstop provides information regarding potential concerns with the All-Wheel-Drive (AWD) system due to tire sizes of differing circumference. Some customers may complain of a chatter sensation felt in the drivetrain of the vehicle and/or the failure of drivetrain component(s). A difference in tire size (width, aspect ratio, construction, rim diameter etc.) may be the cause. |
| CS2306L_OWNRPS2 | 2023-08-24. Service bulletin. CUSTOMER SATISFACTION CAMPAIGN: OWNER RE-NOTIFICATION - This document is the owner re-notification advising that Kia is now making steering wheel lock devices available directly to certain Kia vehicle owners. These devices can help deter a theft attempt. We are making this device available to customers free of charge and will ship it directly to customers who place orders within eighteen (18) months from the date of this letter. |
| CS2301_OWNR | 2023-02-02. Service bulletin. CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia has now developed a software upgrade that can be installed on your vehicle to restrict the operation of the vehicle's ignition system should the locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available free of charge for eighteen (18) months from the date of this letter. When the software upgrade is completed, Kia will also provide you with window stickers that can be applied to your vehicle to discourage a break-in. |
| TSB_CHA084_R8 | 2021-10-22. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly and does not affect the steering effort. |
| TSB_CHA106 | 2021-08-25. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF THE DUAL PINION MOTOR DRIVER POWER STEERING SYSTEM - This bulletin provides information regarding the availability of partial repair (depending on faulty components) of the Dual Pinion Motor Driven Power Steering (DP-MDPS) system on some 2016-2021MY~ Kia vehicles (refer to the table below) in order to enhance customer satisfaction by promoting a cost-effective repair/replacement of a faulty related part, instead of replacement of the complete DP-MDPS assembly. |
| TSB_CHA084_R7 | 2021-04-06. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. |