Service bulletin KC-328
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10201705 |
| Published by NHTSA | 2021-10-01 |
| Manufacturer's number | KC-328 |
| Manufacturer's date | 2021-09-01 |
| NHTSA component | ELECTRICAL SYSTEM |
NHTSA's summary
Diagnostic Trouble Codes (DTC) P208064, P208464, P242B64 and P246F64 Lighting The Malfunction Indicator Lamp (MIL) - US17+OBD19 And Newer Emissions, Model Years 2020 and Newer
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system
Trouble codes named
P2080, P2084, P242B, P246F
| MACK ANTHEM (AN) | 2020, 2021, 2022 (the catalog's model; the bulletin names a series or trim of it) |
|---|---|
| MACK GRANITE (GR) | 2020, 2021, 2022 (the catalog's model; the bulletin names a series or trim of it) |
| MACK LR | 2020, 2021 |
| MACK MD | 2020, 2021, 2022 |
| MACK PINNACLE (PI/PN) | 2020, 2021, 2022 (the catalog's model; the bulletin names a series or trim of it) |
| MACK TE | 2020 to 2021 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V792000 | 2024-10-23. ELECTRICAL SYSTEM:SOFTWARE; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| CBR 159 202608 | 2026-09-01. Service bulletin. Mack Trucks Equipped With A Cummins Engine - Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Vehicles With 2018Instrument Cluster Update, Model Year2018 And Newer |
|---|---|
| CBR 2712-7 032026 | 2026-04-02. Service bulletin. CBR - No Start Condition After Over the Air Programing. |
| CBR 2128-7 202601 | 2026-02-03. Service bulletin. CBR - Engine Control Module (EMS) Software Information - Improvement List (Change Log), US21+OBD2021 Emissions ONLY |
| CBR 2171-11 202511 | 2025-12-03. Service bulletin. CBR - Mack Temperature Sensor Troubleshooting Guide |
| CBR 2172-5 082025 | 2025-09-02. Service bulletin. CBR - When an OTA (Over-The-Air) job starts to program the VECU blocks the starter relay out, if the job ends in a Critical failure, the vehicle will remain in Safe State. |
| CBR 407 072025 | 2025-08-04. Service bulletin. CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded. |
| CBR 2488 072025 | 2025-08-04. Service bulletin. CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data. |
| CBR 901-5 202505 | 2025-06-02. Service bulletin. Remote Control Central Door Lock, Programming; Key Fob Cannot Be Programmed Or Does Not Work After Programming - Model Year 2018 And Newer |
| CBR-2452 202503 | 2025-04-02. Service bulletin. If the vehicle door is open and the truck is in neutral, a popup message may appear on the Driver Information Display (DID) instructing the operator to shift into neutral. If this message appears while the vehicle is already in neutral, the Instrument Cluster (IC)requires a software update. |
| CBR-2376 202409 | 2024-10-04. Service bulletin. CBR: Drivers Information Display (DID) Inoperative/Goes Blank During Vehicle Operation |