Service bulletin T-SB-0055-21
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10201398 |
| Published by NHTSA | 2021-09-13 |
| Manufacturer's number | T-SB-0055-21 |
| Manufacturer's date | 2021-07-22 |
| NHTSA component | WHEELS |
NHTSA's summary
TSB: Some 2021 model year Sienna Hybrid vehicles equipped with FWD and 20-in. clad wheels may exhibit a clicking/creaking noise from one or more of the wheels while driving. The clad wheels are a two-piece design that includes an alloy wheel with a permanently affixed resin wheel cover (cladding). The source of the noise was determined to be contact between the cladding and the wheel. Follow the Repair Procedure in this bulletin to address this condition.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Wheels
| TOYOTA SIENNA HYBRID | 2021 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| Toyota PRO19-02 | 2022-02-14. Service bulletin. POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well. |
|---|---|
| T-SB-0034-21 | 2021-06-21. Service bulletin. TSB During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |
| T-SB-0029-20 Rev | 2020-11-30. Service bulletin. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. |