Service bulletin FSB 468 001

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

NHTSA's summary

On MACK vehicles built between July 6, 2015 and January 15, 2016 equipped with a MACK CRD 150 carrier, the mounting bolt hole on the driver side of the power divider housing which lines up with the fill plug is drilled through to the fill plug hole. This can create a path for a leak around the threads of the mounting bolt. The remaining five mounting bolt holes are blind. When a leak is found in this area, verify that all six mount bolts around the flange are tight. If any of the mounting bolts are found to be loose, the power divider lockout (PDLO) assembly must be removed and the gasket replaced. If all the bolts are tight, the bolt at the 3:00 position should be removed and cleaned along with the mounting hole with a residue free cleaning spray like contact cleaner.

The document

• NHTSA's copy of the document (PDF)
• If that address does not open, try this one

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Air bags, Electrical system, Engine, Equipment and accessories, Wheels

Listing a model year does not mean every vehicle of it is concerned: the document says which.

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

• Bulletins for another vehicle
• Report an error on this page
• Report an error by email