# Service bulletin TSB2142A001REV2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10199126
- Published by NHTSA: 2021\-07\-09
- Manufacturer's number: TSB2142A001REV2
- Manufacturer's date: 2021\-06\-03
- NHTSA component: LATCHES/LOCKS/LINKAGES

## NHTSA's summary

This Technical Service Bulletin was sent to dealers as a revision to the original publication and to provide clean points for the Hood Latch Adjustments.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10199126-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10199126-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Latches and locks

## Vehicles listed

- 2022 MITSUBISHI OUTLANDER

## Other bulletins for the same vehicles and component

- [TSB\-22\-54\-004](/bulletins/10211534.md), 2022-05-09, Service bulletin: LATCHES/LOCKS/LINKAGES:TAILGATE:LOCK; LATCHES/LOCKS/LINKAGES:DOORS:LOCK; ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS. This Technical Service Bulletin was sent to dealers to provide a countermeasure procedure is to apply a setting change that prevents the horn from becoming audible after unlocking and opening the door or tailgate.
- [TSB 21 42A 001 R](/bulletins/10200352.md), 2021-08-16, Service bulletin: LATCHES/LOCKS/LINKAGES; STRUCTURE; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. This Technical Service Bulletin was sent to dealers as a revision to the original publication and to provide clean points for the Hood Latch Adjustments.
- [TSB\-21\-42A\-001](/bulletins/10190110.md), 2021-04-08, Service bulletin: STRUCTURE:BODY:HOOD; EQUIPMENT; LATCHES/LOCKS/LINKAGES. This Technical Service Bulletin was sent to dealers a hood flutter may occur on 2022 Outlanders caused by improper Hood Latch and Bumper height alignment.

JSON: [/v1/bulletins/10199126](/v1/bulletins/10199126)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB2142A001REV2&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10199126&vehicle=Service%20bulletin%20TSB2142A001REV2)