Service bulletin 2061344/3
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10198670 |
| Published by NHTSA | 2021-07-02 |
| Manufacturer's number | 2061344/3 |
| Manufacturer's date | 2021-06-04 |
| NHTSA component | SERVICE BRAKES, HYDRAULIC |
NHTSA's summary
Rear brake pad - Shim installation (SC 20/32) Technical background Fitment of shims to the rear brake pads, specific grease should also be applied to the shims Remedy: In high ambient temperatures in conjunction with low speed, low pressure brake vibration is dampened by the fitment of shims and grease Customer notification: Customers do not need to be informed directly of this campaign. Please ensure that all affected vehicles are checked and repaired during the PDI procedure
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Brakes
| BENTLEY BENTAYGA | 2021 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2021518 | 2021-08-18. Brakes |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 2075034/4 | 2026-06-04. Service bulletin. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Customer statement / workshop findings: One or a combination of the following is evident within the DIP (Figure 1) • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning |
|---|---|
| 2052785/10 | 2025-11-04. Service bulletin. Brake noise identification |
| 2075034/3 | 2025-07-30. Service bulletin. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Condition: One or a combination of the following is evident within the DIP • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning |
| 2060726/4 | 2025-03-07. Service bulletin. Bentayga - Winter Wheel and Tyre For CSiC Braking Systems. Technical Background: When opting to use Winter Tyres on vehicles specified with Ceramic brake rotors, the only permissible wheel rim option is 21 Inch 7 Twin spoke –36A 601 025Q. |
| 2052785/9 | 2025-03-07. Service bulletin. Brake noise identification. Technical Background: Brake noises can be attributed to many causes, the most common causes are as follows: • Brake discs or pads are close to their wear limit • New brake pads and/or discs have not been properly bedded in after installation • Aftermarket pads or discs are installed • There is debris such as small stones, grit, road salt or sand between the brake disc and pad • Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time |
| 2071730/4 | 2025-01-07. Service bulletin. Bentayga rear brake noise/squeal - Repair method depending on the brake noise frequency (Iron brakes only). |
| 2075034/2 | 2024-11-01. Service bulletin. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Customer statement / workshop findings: One or a combination of the following is evident within the DIP • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning |
| 2071730/3 | 2024-08-07. Service bulletin. Bentayga rear brake noise/squeal - Repair method depending on the brake noise frequency (Iron brakes only). Scenario 1 Vibration of 1.2 to 1.4 KHz is produced from the rear brakes whilst braking at low speed Whilst braking at low speed, a vibration of 1.2 to 1.4 KHz or 5 KHz can be produced from friction between the rear brake pad and disc resulting in rear brake noise/squeal Scenario 2 Vibration of 3.4 KHz is produced from the rear brakes While braking at low speed a vibration of 3.4 KHz can be produced during brake application at low speed resulting in rear brake noise/squeal Scenario 3 Vibration of 5 KHz is produced from the rear brakes whilst braking at low speed Whilst braking at low speed, a vibration of 5 KHz can be produced from friction between the rear brake pad and disc resulting in rear brake noise/squeal. |
| 2071730/2 | 2023-12-08. Service bulletin. Bentayga rear brake noise/squeal - Repair method depending on the brake noise frequency (Iron brakes only). |
| 2054862.10 | 2023-11-08. Service bulletin. Bentayga Front Brake Squeal - 1.5 KHz to 2.0 KHz Customer Statement: -Front brake squeal with a frequency of 1.5 KHz to 2.0 KHz |