# Service bulletin SMT\-TN\-167

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10192923
- Published by NHTSA: 2021\-05\-10
- Manufacturer's number: SMT\-TN\-167
- Manufacturer's date: 2016\-03\-01
- NHTSA component: ENGINE AND ENGINE COOLING

## NHTSA's summary

All new Explorer models must have the latest instrument software, chassis ECM software and engine ECM calibration installed prior to pre\-delivery inspection and handover to the customer. Dealers are requested to download the latest software and calibration before performing the pre\-delivery inspection, as described in the following procedure.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10192923-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10192923-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2012 to 2013 TRIUMPH EXPLORER XC
- 2017 TRIUMPH EXPLORER XCA
- 2016 to 2017 TRIUMPH EXPLORER XCX
- 2017 TRIUMPH EXPLORER XR
- 2017 TRIUMPH EXPLORER XRT
- 2017 TRIUMPH EXPLORER XRX
- 2016 TRIUMPH EXPLORER XRX LRH

## Other bulletins for the same vehicles and component

- [SMT\-COM01](/bulletins/10221910.md), 2022-09-26, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Dealer notice reminding of the new California Prop 65 regulation.
- [SMT\-TB201\-20DEC2](/bulletins/10170558.md), 2020-01-21, Service bulletin: POWER TRAIN; ENGINE; ELECTRICAL SYSTEM; STEERING; EQUIPMENT. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool \- End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool \- Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing.
- [SMT\-TN176\-03May2](/bulletins/10125300.md), 2017-12-14, Service bulletin: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; STEERING: STEERING WHEEL/HANDLE BAR; EQUIPMENT; STEERING; SEATS. Technical News 176 provides instructions that apply to Handlebar End Weight Fixings, Coolant Expansion Tank Cover Fixings, Airbox and Immobiliser Connector Anti\-Tamper Foam Pad, Scheduled Maintenance Chart, Rider's Seat Fixing, Triumph Diagnoatic Tool \- End of Support for Mictosoft Windows Vista, Temporary Packing Crate, Steering Lock Removal and Installation, Exhaust Clamp and Bolt Assembly, Service Manual Update \- Purge Control Valce and Engine Breather Cover, Belly Pan Panel Assembly Fixings.
- [SMT\-Com01\-10Apri](/bulletins/10122033.md), 2017-11-03, Service bulletin: EQUIPMENT; ENGINE. Dealer notice announcing that Service Bulletin 542 is now available.
- [SMT\-SB542\-10Apri](/bulletins/10122032.md), 2017-11-03, Service bulletin: EQUIPMENT; STRUCTURE; ENGINE. Service bulletin 542 addresses the need to over check the engine to frame alignment, frame adjuster tightening torques, and engine bolt tightening torques.
- [SMT\-TN 159 1 Oct](/bulletins/10122011.md), 2017-11-03, Service bulletin: STEERING; EQUIPMENT:OTHER:LABELS; POWER TRAIN; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING; SUSPENSION. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook.
- [SMT\-COM02\-6 JUNE](/bulletins/10096628.md), 2017-03-29, Service bulletin: ENGINE. DEALER NOTICE ANNOUNCING NEW CODE TO UNLOCK THE ENGINE CONTROL MODULE AT TIME OF PRE DELIVERY INSPECTION

JSON: [/v1/bulletins/10192923](/v1/bulletins/10192923)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SMT-TN-167&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10192923&vehicle=Service%20bulletin%20SMT-TN-167)