# Service bulletin ITB15028

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10192653
- Published by NHTSA: 2021\-05\-10
- Manufacturer's number: ITB15028
- Manufacturer's date: 2015\-10\-14
- NHTSA component: VEHICLE SPEED CONTROL

## NHTSA's summary

SERVICE INFORMATION For Applied Vehicles, the rear door partition seals have been deleted. These seal are no longer a standard component and should not be considered missing and should not be installed. Do not submit a warranty claim for installation of a missing partition seal. Please see this bulletin for further details.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2015/MC-10192653-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2015/MC-10192653-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Throttle and cruise control

## Vehicles listed

- 2015 INFINITI QX60

## Other bulletins for the same vehicles and component

- [ITB14059A](/bulletins/10192666.md), 2021-05-10, Service bulletin: VEHICLE SPEED CONTROL; PARKING BRAKE; SEAT BELTS. IF YOU CONFIRM All "hands free" functions of the Intelligent Key \(I\-Key\) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: \- The issue of all I\-Key "hands free" functions not working may occur intermittently or all the time. \- The message "No Key Detected" or similar may show on the Vehicle Information Display \(located in the combination meter\). \- All I\-Key remote button functions \(door lock/unlock, etc.\) WILL work normally when all I\-Key "hands free" functions are NOT working. ACTION 1. Inspect the I\-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I\-Key functions \(both "hands free" and remote\) work properly after battery replacement. NOTE: Do NOT replace the BCM, I\-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.
- [ITB\-14\-051](/bulletins/10056785.md), 2015-02-20, Service bulletin: VEHICLE SPEED CONTROL; VEHICLE SPEED CONTROL:CRUISE CONTROL. INFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING \(FCW\) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013\-14 JX35, QX60, 2014\-15 Q50. \*PE UPDATED 9/10/15. \*PE

JSON: [/v1/bulletins/10192653](/v1/bulletins/10192653)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB15028&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10192653&vehicle=Service%20bulletin%20ITB15028)