# Service bulletin PC382A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10192595
- Published by NHTSA: 2021\-05\-10
- Manufacturer's number: PC382A
- Manufacturer's date: 2015\-07\-01
- NHTSA component: VEHICLE SPEED CONTROL

## NHTSA's summary

Nissan is conducting a dealer inventory inspection on certain 2015 Rogue to inspect and, if necessary, replace the driver's side door locks.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2015/MC-10192595-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2015/MC-10192595-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Throttle and cruise control

## Vehicles listed

- 2015 NISSAN ROGUE

## Other bulletins for the same vehicles and component

- [NTB14114A](/bulletins/10192663.md), 2021-05-10, Service bulletin: PARKING BRAKE; SEAT BELTS; VEHICLE SPEED CONTROL. IF YOU CONFIRM All "hands free" functions of the Intelligent Key \(I\-Key\) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: \- The issue of all I\-Key "hands free" functions not working may occur intermittently or all the time. \- The message "No Key Detected" or similar may show on the Vehicle Information Display \(located in the combination meter\). \- All I\-Key remote button functions \(door lock/unlock, etc.\) WILL work normally when all I\-Key "hands free" functions are NOT working. ACTION 1. Inspect the I\-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I\-Key functions \(both "hands free" and remote\) work properly after battery replacement. NOTE: Do NOT replace the BCM, I\-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.
- [PC382](/bulletins/10192585.md), 2021-05-10, Service bulletin: SEATS; VEHICLE SPEED CONTROL. Effective immediately, Nissan is placing a temporary Quality Assurance \(QA\) Hold on approximately 41 MY 2015 Rogue \(T32\) vehicles because the door latch may not fully engage. This issue is still under investigation.
- [NTB18\-033b](/bulletins/10178228.md), 2020-08-09, Service bulletin: EQUIPMENT; VEHICLE SPEED CONTROL:ACCELERATOR PEDAL. ACCELERATOR PEDAL VIBRATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB18\-033a](/bulletins/10152013.md), 2018-12-17, Service bulletin: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL. 2014 ? 2019 ROGUE; ACCELERATOR PEDAL VIBRATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB13\-054b](/bulletins/10128639.md), 2018-02-12, Service bulletin: VEHICLE SPEED CONTROL; ENGINE. ALTIMA AND ROGUE; ENGINE TURNS OFF OR HESITATES WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT TEMPERATURES \(\+100°F\) This bulletin has been amended. The APPLIED VEHICLES section and Table A on pages 5 and 6 have been revised. No other changes have been made. Please discard previous versions of this bulletin.

JSON: [/v1/bulletins/10192595](/v1/bulletins/10192595)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PC382A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10192595&vehicle=Service%20bulletin%20PC382A)