# Service bulletin NTB13083

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10192237
- Published by NHTSA: 2021\-05\-10
- Manufacturer's number: NTB13083
- Manufacturer's date: 2013\-09\-03
- NHTSA component: PARKING BRAKE

## NHTSA's summary

SERVICE INFORMATION To use the Apps feature: \- The customer must be signed into the NissanConnect App and have it open \(in the background is okay\) on the phone before pressing the Apps button on the audio system. \- If the NissanConnect App is not open on the phone when the Apps button is pressed, the screen shown in Figure 1 will display and the Apps mode will not function. If a customer has not set up their NissanConnect App account, perform the steps in this bulletin. See this bulletin for further detail.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10192237-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10192237-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes, Parking brake

## Vehicles listed

- 2014 NISSAN ALTIMA

## Other bulletins for the same vehicles and component

- [NTB14114A](/bulletins/10192663.md), 2021-05-10, Service bulletin: PARKING BRAKE; SEAT BELTS; VEHICLE SPEED CONTROL. IF YOU CONFIRM All "hands free" functions of the Intelligent Key \(I\-Key\) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: \- The issue of all I\-Key "hands free" functions not working may occur intermittently or all the time. \- The message "No Key Detected" or similar may show on the Vehicle Information Display \(located in the combination meter\). \- All I\-Key remote button functions \(door lock/unlock, etc.\) WILL work normally when all I\-Key "hands free" functions are NOT working. ACTION 1. Inspect the I\-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I\-Key functions \(both "hands free" and remote\) work properly after battery replacement. NOTE: Do NOT replace the BCM, I\-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.

JSON: [/v1/bulletins/10192237](/v1/bulletins/10192237)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB13083&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10192237&vehicle=Service%20bulletin%20NTB13083)