# Service bulletin NTB15\-027A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10192012
- Published by NHTSA: 2021\-05\-09
- Manufacturer's number: NTB15\-027A
- Manufacturer's date: 2021\-03\-12
- NHTSA component: FORWARD COLLISION AVOIDANCE

## NHTSA's summary

2014 – 2015 ROGUE FCW SYSTEM SUPPLEMENTAL INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10192012-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10192012-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Vehicles listed

- 2014 to 2015 NISSAN ROGUE

## Other bulletins for the same vehicles and component

- [NTB19\-042F](/bulletins/11014472.md), 2025-02-25, Service bulletin: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; ELECTRICAL SYSTEM; SERVICE BRAKES. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera \(see Figure 1\) SERVICE INFORMATION If the Automatic Emergency Braking \(AEB\) warning light or is blinking \(but not illuminated steadily\) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: • When contamination or foreign material adhere to the lane camera viewing window on the windshield. • When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. • When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do\-it\-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know\-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: • Refer to the following pages. • Use the search keyword “blinking” in the ESM.
- [NTB19\-033G](/bulletins/11014471.md), 2025-02-25, Service bulletin: SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; ELECTRICAL SYSTEM. INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION \(on the next page\) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do\-it\-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know\-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving \(Figure 1\), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving \(Figure 2\). AND DTC C1A16, C1A16\-97, C2582, or C2582\-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
- [NTB19\-042E](/bulletins/11001208.md), 2024-06-07, Service bulletin: ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB19\-042D](/bulletins/10234002.md), 2023-04-07, Service bulletin: FORWARD COLLISION AVOIDANCE. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB19\-042C](/bulletins/10207869.md), 2022-02-10, Service bulletin: ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. AEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB21\-106](/bulletins/10206321.md), 2022-01-08, Service bulletin: ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. DTC C1A17\-49 OR C2580\-49 STORED IN LASER/RADAR SERVICE INFORMATION If DTC C1A17\-49 or C2580\-49 is stored in LASER/RADAR in the “PAST” column: • Erase the DTC. • DO NOT replace any parts. If DTC C1A17\-49 or C2580\-49 is stored in LASER/RADAR in the "CURRENT" column, refer to the applicable ESM for instructions.
- [NTB13106E](/bulletins/10192813.md), 2021-05-10, Service bulletin: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\); STEERING; ELECTRICAL SYSTEM; BACK OVER PREVENTION. SERVICE INFORMATION If the configuration of the Audio/Navigation unit has not been completed correctly, some of the symptoms that may occur are: \* Intermittent or no back up camera operation \* No steering wheel switch response to audio inputs \* No volume response from volume knob \* Volume very loud or very quiet and adjustment is overly sensitive \* Equalizer is adjusted so that Bass control is at maximum all the time \* DTC U1000 for AVM C/U could be present If the above symptoms occur: \* Confirm the configuration of the Audio/Navigation unit is correct. NOTE: Correct configuration of the appropriate control unit will restore correct operation. Audio/Navigation unit configuration is outlined starting on page 2. See this bulletin for further detail.
- [NTB09131B](/bulletins/10192801.md), 2021-05-10, Service bulletin: FORWARD COLLISION AVOIDANCE; EQUIPMENT:OTHER:LABELS. SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- [NTB16025](/bulletins/10192771.md), 2021-05-10, Service bulletin: EQUIPMENT; BACK OVER PREVENTION; ELECTRICAL SYSTEM. SERVICE INFORMATION If an Air Bag Diagnosis Sensor Unit is replaced and the configuration of the old unit could not be saved, use the Service Procedure in this bulletin to: \- Load the VIN specific configuration file from your electronic parts catalog \(FAST or equivalent\) onto a portable USB storage device \(thumb drive\) \- Plug the thumb drive into your CONSULT PC. \- Configure the new Air Bag Diagnosis Sensor Unit using the file that you loaded onto the thumb drive. See this bulletin for further detail.
- [NTB15062A](/bulletins/10192656.md), 2021-05-10, Service bulletin: STRUCTURE; BACK OVER PREVENTION; EQUIPMENT; SUSPENSION; ELECTRICAL SYSTEM. IF YOU CONFIRM There is a popping noise from either the right or the left front coil springs when turning to the right or left. NOTE: Electronic chassis ears may be helpful in isolating this type of noise. ACTION Replace both front coil springs, strut mount bearings, and all other parts listed under PARTS INFORMATION. Position the coil springs as shown on pages 2\-5. Check the front end alignment, adjust to factory specifications as needed. NOTE: Refer to the Electronic Service Manual \(ESM\), section FSU Front Suspension, for strut coil spring removal, installation, and alignment information. IMPORTANT: The Coil Spring Installation Guidelines section in this bulletin MUST be followed in order for a correct repair to be performed.

JSON: [/v1/bulletins/10192012](/v1/bulletins/10192012)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB15-027A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10192012&vehicle=Service%20bulletin%20NTB15-027A)