# Service bulletin SSM 49722

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10191065
- Published by NHTSA: 2021\-05\-03
- Manufacturer's number: SSM 49722
- Manufacturer's date: 2021\-04\-07
- NHTSA component: WHEELS

## NHTSA's summary

Some 2017\-2021 F\-Super Duty vehicles equipped with dual rear wheels \(DRW\) and 17 inch aluminum wheels may require valve stem replacement for the front wheels. The parts catalog has been updated to use service part F2GZ\-1700\-D for the front wheels.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10191065-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10191065-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Wheels

## Vehicles listed

- 2017 to 2021 FORD F\-250 SD
- 2017 to 2021 FORD F\-350 SD
- 2017 to 2021 FORD F\-450 SD
- 2017 to 2021 FORD F\-550 SD

## Recalls for the same vehicles and component

- [2021363](/recalls/tc/2021363.md), 2021-06-10: Wheels

## Other bulletins for the same vehicles and component

- [TSB 22\-2389](/bulletins/10225454.md), 2022-11-01, Service bulletin: WHEELS. Some 2017\-2020 F\-Super Duty vehicles equipped with dual rear wheels \(DRW\) and 17 inch aluminum wheels may exhibit a loss of tire pressure from the valve stem sealing area of the front wheels. This may be due to corrosion of the wheel preventing the valve stem from sealing properly. To correct the condition, follow the Service Procedure to clean the corrosion from the valve stem sealing area of the affected wheel.
- [CSR 518](/bulletins/10199087.md), 2021-07-09, Service bulletin: WHEELS. Ford Motor Company has determined a defect that relates to motor vehicle safety exists on certain 2021 model year Super Duty vehicles with front\-wheel hub extensions built between February 7, 2021, and June 3, 2021. Contact your local Ford dealer to schedule a service date to perform the recall. Refer to the included communication from Ford for additional information. Altec is not able to complete this repair. All work must be completed by an authorized Ford dealer. This repair is not covered under the Altec Warranty policy.
- [SSM 48602](/bulletins/10172952.md), 2020-04-02, Service bulletin: BACK OVER PREVENTION; WHEELS. SSM 48602 \- 2020 F\-Super Duty \- Incorrect Or Missing Factory Invoiced Accessory \(FIA\) Trailer Camera Tire Pressure Monitoring System \(TPMS\) Kits Some 2020 F\-Super Duty vehicles were shipped with incorrect FIA trailer camera/TPMS kits and some vehicles ordered with the Trailer TPMS only kit did not ship with the kit. The only accessory trailer kit which can be used on 2020 vehicles is the Trailer Camera only kit HC3J\-1A515\-CC. Do not attempt to install kits \(HC3J\-1A515\-AC or BC\) with trailer TPMS. Vehicles equipped with fifth wheel prep pack and Pro Trailer Backup Assist should install the provided trailer yaw sensor kit 14G551 and plug the yaw sensor wiring into the 12\-way bed connector. The trailer camera only kit that shipped with the vehicle can be installed as it connects to the bumper mounted 7/12 trailer connector provided. Follow Super Duty Owners Manual Park Aid section to display trailer Auxiliary Camera view. Trailer TPMS only kit is still unavailable. Monitor OASIS for updates.

JSON: [/v1/bulletins/10191065](/v1/bulletins/10191065)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM%2049722&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10191065&vehicle=Service%20bulletin%20SSM%2049722)