# Service bulletin PIT5744A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10190365
- Published by NHTSA: 2021\-04\-19
- Manufacturer's number: PIT5744A
- Manufacturer's date: 2021\-03\-05
- NHTSA component: VISIBILITY; BACK OVER PREVENTION

## NHTSA's summary

This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10190365-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10190365-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Glass, wipers and mirrors, Backup camera

## Vehicles listed

- 2019 CHEVROLET SILVERADO 1500
- 2021 CHEVROLET SILVERADO 1500
- 2020 CHEVROLET SILVERADO 2500
- 2019 GMC SIERRA 1500
- 2021 GMC SIERRA 1500
- 2020 GMC SIERRA 2500

## Other bulletins for the same vehicles and component

- [22\-NA\-068](/bulletins/11014579.md), 2025-02-28, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY; BACK OVER PREVENTION: WARNINGS. This technical bulletin provides repair information to correct a customer concern of Diagnostic Tips For Park Assist Off Message / Unwanted Or False Park Assist Alerts / No DTCs.
- [PIT5697D](/bulletins/11011687.md), 2024-12-09, Service bulletin: UNKNOWN OR OTHER; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up\-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
- [PIT5386J](/bulletins/10249298.md), 2024-01-29, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back\-up alarm inoperative during the Pre\-Delivery Inspection. On trucks equipped with the Back Up Alarm \(RPO 8S3\), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
- [PIP5847B](/bulletins/10247363.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin.
- [PIP5847A](/bulletins/10242281.md), 2023-09-18, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin.
- [PIT5990A](/bulletins/10240782.md), 2023-08-21, Service bulletin: BACK OVER PREVENTION; STRUCTURE. This Preliminary information communicates an issue with a wind noise while driving at highway speeds and dealers are to inspect the body harness pass through for being full seated into the cowl.
- [PIT5697C](/bulletins/10239171.md), 2023-07-17, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up\-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
- [23\-NA\-042](/bulletins/10239115.md), 2023-07-14, Service bulletin: BACK OVER PREVENTION:SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM. This service bulletin provides repair information to update radio software to correct customer concerns of Software related issues.
- [23\-NA\-062](/bulletins/10237843.md), 2023-06-19, Service bulletin: EQUIPMENT; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM. This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues \- DTCs B395A, B395B, B395C, B101E, B101D.
- [PIT5544G](/bulletins/10237675.md), 2023-06-13, Service bulletin: BACK OVER PREVENTION; POWER TRAIN; STEERING. This Preliminary information communicates information on a hydrauilc rush type noise from the power steering gear. This noise is a characteristic of the new Active Hydraulic Assist System RPO NV8 and no repairs should be made. The noise is most noticeable in the cab at idle, in park, with all accessories turned off.

JSON: [/v1/bulletins/10190365](/v1/bulletins/10190365)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIT5744A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10190365&vehicle=Service%20bulletin%20PIT5744A)