WenmarOpen by Wenmar Pro

Service bulletin 18-015-13 REV. A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10188674
Published by NHTSA2021-03-15
Manufacturer's number18-015-13 REV. A
Manufacturer's date2013-05-11
NHTSA componentENGINE AND ENGINE COOLING:ENGINE; ELECTRICAL SYSTEM

NHTSA's summary

Flash: No Start or Start and Stall When Using Remote Start This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software and updating the Body Control Module (BCM) software. A small number of customers may experience any of the following conditions: Engine starts then immediately stalls when using Remote Start system (Instrument Cluster may display the message ?Remote Start Disabled, Start Vehicle to Reset?) Engine cranks and does not start following the condition described above Engine may be hard to re-start at ambient temps below 10°F(-12°C)Updating the software will correct the conditions listed above.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Engine

Vehicles listed
DODGE DART2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20131992013-06-07. Engine

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
09-018-242024-09-04. Service bulletin. "2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ● Oil pressure low indicator lamp illumination between oil changes. ● Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block."
91002262024-01-08. Service bulletin. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
91002262023-10-30. Service bulletin. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
07007232023-07-31. Service bulletin. Water Quality When Mixed With Engine Coolant
18048232023-05-30. Service bulletin. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
09003232023-05-30. Service bulletin. 2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ? Oil pressure low indicator lamp illumination between oil changes. ? Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.
08085142023-02-21. Service bulletin. This bulletin involves updating the Convergence Telematics Module (CTM) software.
S21090000042023-01-17. Service bulletin. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
08085142023-01-17. Service bulletin. This bulletin involves updating the Convergence Telematics Module (CTM) software
1806114a2023-01-17. Service bulletin. Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P2172 - High Airflow/Vacuum Leak Detected ? P1D73 - AGS Performance ? U0140 - Lost Communication With Body Control Module