# Service bulletin 23\-015\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10188650
- Published by NHTSA: 2021\-03\-15
- Manufacturer's number: 23\-015\-13
- Manufacturer's date: 2013\-04\-03
- NHTSA component: STRUCTURE; EQUIPMENT

## NHTSA's summary

This bulletin involves inspecting and if necessary replacing the Ram Box lid. Ram box lid discoloration.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10188650-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10188650-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Equipment and accessories

## Vehicles listed

- 2010 DODGE RAM 1500

## Other bulletins for the same vehicles and component

- [9100196](/bulletins/10242717.md), 2023-09-25, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- [S2209000004](/bulletins/10227983.md), 2022-12-19, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- [9004470](/bulletins/10225951.md), 2022-11-07, Service bulletin: STRUCTURE:BODY:BUMPERS; ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES; TRAILER HITCHES. CONNECTOR Trailer Tow,WIRING Trailer Tow,CONNECTOR 7 Way,WIRING Rear Bumper If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- [3100519](/bulletins/10220101.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- [3100319](/bulletins/10220099.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- [3100619](/bulletins/10220097.md), 2022-09-15, Service bulletin: STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- [9002350](/bulletins/10216003.md), 2022-07-18, Service bulletin: SERVICE BRAKES; ELECTRICAL SYSTEM; EQUIPMENT. Part Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module \(ITBM\) please review the following items.\~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.\~ 2. If the Diagnostic Trouble Code\(DTC\) reported by the ITBM is C10C7\-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7\-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.\~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.\~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.\~ 5. Please follow the service manual procedures before changing the ITBM.\~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.
- [23\-015\-13](/bulletins/10215817.md), 2022-07-18, Service bulletin: EQUIPMENT. This bulletin involves inspecting and if necessary replacing the Ram Box lid. Ram box lid discoloration.
- [S2123000011](/bulletins/10188765.md), 2021-03-15, Service bulletin: EQUIPMENT; VISIBILITY:WINDSHIELD:CRITICAL FASTENERS; VISIBILITY:WINDSHIELD. Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
- [9002350](/bulletins/10188698.md), 2021-03-15, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL; ELECTRICAL SYSTEM. Part Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module \(ITBM\) please review the following items.\~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.\~ 2. If the Diagnostic Trouble Code\(DTC\) reported by the ITBM is C10C7\-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7\-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.\~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.\~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.\~ 5. Please follow the service manual procedures before changing the ITBM.\~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.

JSON: [/v1/bulletins/10188650](/v1/bulletins/10188650)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2023-015-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10188650&vehicle=Service%20bulletin%2023-015-13)