# Service bulletin 2060120/3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10188256
- Published by NHTSA: 2021\-03\-05
- Manufacturer's number: 2060120/3
- Manufacturer's date: 2021\-02\-05
- NHTSA component: STRUCTURE; EQUIPMENT; LATCHES/LOCKS/LINKAGES:HOOD:LATCH

## NHTSA's summary

Convertible hood cannot close \- Header trim flap eyelet broken. Customer statement / workshop findings: Convertible hood cannot close/latch due to a broken eyelet. The eyelet is part of the trim flap assembly \(Figure 1\) Technical background: A kit of parts to replace the right and left hand trim flaps is now available \(Figure 2\) NOTE: The trim flaps should be replaced in pairs

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2021/MC-10188256-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2021/MC-10188256-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Equipment and accessories, Latches and locks, Hood latch

## Vehicles listed

- 2019 to 2021 BENTLEY CONTINENTAL GT CABRIO

## Other bulletins for the same vehicles and component

- [2060120/2](/bulletins/10182290.md), 2020-11-06, Service bulletin: EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. Convertible hood cannot close \- Temporary repair solution \- Header trim flap eyelet broken. Customer statement/workshop findings: Convertible hood cannot close/latch due to a broken eyelet. The eyelet is part of the header trim flap \(Figure 1\) Technical background: CAUTION: The Operative MUST ensure that all interior/exterior trim assemblies are suitably protected. Warranty payments will not be considered under any circumstances for any damage Option 1 \- Manually assist the flap to allow the hood to fully close and latch as shown in the video within the Bentley Hub reference TPI 2060120/\- Great care must be taken when conducting the manual assist procedure

JSON: [/v1/bulletins/10188256](/v1/bulletins/10188256)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202060120%2F3&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10188256&vehicle=Service%20bulletin%202060120%2F3)