Service bulletin 02-004-21-3785
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10188017 |
| Published by NHTSA | 2021-03-03 |
| Manufacturer's number | 02-004-21-3785 |
| Manufacturer's date | 2021-02-22 |
| NHTSA component | SUSPENSION |
NHTSA's summary
Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface. The noise may be caused by the mounting rubber (1) because of insufficient clearance between the rubber and the metal bracket of the mounting rubber during the assembly process. To correct this issue, the mounting rubber has been modified to ensure the proper clearance.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Suspension
| MAZDA CX-30 | 2020 |
|---|---|
| MAZDA MAZDA3 | 2019, 2020 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-051-25 | 2025-12-05. Service bulletin. Noise, Vibration, and Harshness (NVH) Diagnostic Guidelines Diagnostic Guidelines When diagnosing NVH concerns, it is essential to first classify the issue into one of three primary categories: Noise, Vibration, or Harshness. Many customer complaints may involve overlapping symptoms, such as both noise and vibration, so identifying the dominant characteristic is critical. Once the primary symptom is determined, follow the appropriate diagnostic path. For example, if a concern includes both noise and vibration but is related to vehicle speed, the vibration diagnostic path should be followed. When considering component replacement during the diagnostic process, it is best practice to start with the lowest cost or most accessible part unless diagnostic evidence clearly identifies a more expensive or complex component as the root cause. This approach helps minimize repair costs and avoids unnecessary part replacements. For example, a growling or bearing whine noise may be mistakenly attributed to internal components in the differential, transfer unit, or transmission, when the actual source is a wheel bearing. Misdiagnosis like this can lead to unnecessary repairs, added time and cost. To help prevent this, always follow the guidelines in the repair procedure. |
|---|---|
| 02-003-24 | 2024-09-04. Service bulletin. Some customers may experience a rattle noise coming from the front suspension while driving the vehicle, with no other driveability concerns. The rattle noise may be caused by a decrease in tightening torque of the two (2) front lower control arm bolts (B) shown in the image below. |
| 09-038-23 | 2023-12-05. Service bulletin. Some customers may complain about the poor appearance due to an uneven rear beltline molding joint. This concern is caused by the rear beltline molding not being manufactured according to the original designed shape. To eliminate this concern, the rear beltline molding manufacturing process was improved to prevent form shape discrepancies from the original design. |
| 02-004-22a | 2022-12-02. Service bulletin. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal. |
| SA-057-22 | 2022-09-06. Service bulletin. Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface |
| 02-004-22 | 2022-06-04. Service bulletin. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal. |
| SA-006-22 | 2022-03-04. Service bulletin. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure. |
| 02-006-20-3688 | 2020-10-02. Service bulletin. Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface. The noise may be caused by the mounting rubber (1) because of insufficient clearance between the rubber and the metal bracket of the mounting rubber during the assembly process. To correct this issue, the mounting rubber has been modified to ensure the proper clearance. |
| CSP06a | 2020-08-05. Service bulletin. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from Marketing “Service Advisors and BDC Employees” and share this specific information with the customer after the vehicle has been updated under CSP (06). |
| 02-002-20-3651 | 2020-01-23. Service bulletin. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal. |