Service bulletin A9120582051664_3
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10185235 |
| Published by NHTSA | 2021-01-08 |
| Manufacturer's number | A9120582051664_3 |
| Manufacturer's date | 2020-12-18 |
| NHTSA component | ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL |
NHTSA's summary
This bulletin contains repair instructions for when there is an emergency call function message in the instrument cluster with DTC B191604.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Instrument cluster
Trouble codes named
B1916
| AUDI A4 | 2018 |
|---|---|
| AUDI A5 | 2018 |
| AUDI Q5 | 2018 |
| AUDI Q7 | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| A9424802055123_5 | 2024-05-07. Service bulletin. This bulletin provides information when the rear lighting warning is displayed in the instrument cluster; various DTCs are stored in the comfort system control module. |
|---|---|
| A4024722067804_3 | 2024-02-06. Service bulletin. This bulletin provides information when DTC C129700 is logged in address 00D4 and/or 00D5 for active roll stabilization. |
| A9023562032113_8 | 2023-12-06. Service bulletin. This bulletin provides general information about the outside air temperature reading. |
| A9023322059335_4 | 2023-08-04. Service bulletin. This bulletin provides information for when there is noise from the area around the instrument cluster. |
| A4323742059665_5 | 2023-06-06. Service bulletin. This bulletin provides an SVM update for when the warning light for the suspension appears in the instrument cluster, and the SVM registers an unknown event when carrying out "Check control unit configuration" and cannot be automatically parameterized. |
| A4323732051336_7 | 2023-06-06. Service bulletin. This bulletin advises that if the warning lamp for the damper control in the instrument cluster is on, and DTC B200FF0 is stored to delete the DTC and perform suspension basic settings. |
| A4323722067531_2 | 2023-06-06. Service bulletin. This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0, B200FF1, B200FF3, B200FF4, B200FF5. |
| A3923542048671_6 | 2023-06-06. Service bulletin. This bulletin provides a software update for when "All Wheel Drive Malfunction Message" is displayed in the instrument cluster and DTC U030000 is logged. |
| A2023592070211_1 | 2023-06-06. Service bulletin. This bulletin provides information for when an EPCO warning and a fuel system warning are displayed in the instrument cluster with DTC B10581B. |
| A9022582059335_3 | 2022-05-05. Service bulletin. This bulletin contains information on noises from the instrument cluster installation area. |