WenmarOpen by Wenmar Pro

Service bulletin SSM 49404

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10184636
Published by NHTSA2021-01-05
Manufacturer's numberSSM 49404
Manufacturer's date2020-12-16
NHTSA componentSEATS; EQUIPMENT

NHTSA's summary

Some 2021 Explorer Limited trim vehicles equipped with the 300A convenience package including 2nd row power-fold backrest and 3rd row manual folding seats may exhibit diagnostic trouble codes (DTCs) B154D:15 and/or B11CE:15 stored in the power fold seat module (SCMJ). If these DTCs are noticed during diagnosis of unrelated concerns, they should be ignored. No repairs should be attempted to address these DTCs.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories, Seats

Trouble codes named

B11CE, B154D

Vehicles listed
FORD EXPLORER2021

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20263392026-07-14. Seats And Restraints
26V4510002026-07-14. SEATS:MID/REAR ASSEMBLY
20261242026-03-17. Seats And Restraints
25V6850002025-10-10. EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
20253282025-06-13. Seats And Restraints
25V3930002025-06-13. SEATS:MID/REAR ASSEMBLY
24V8520002024-11-08. EQUIPMENT:OTHER:LABELS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 551002026-09-01. Service bulletin. For Various Ford and Lincoln vehicles, if diagnostics lead to the replacement of the front seat cushion cover J-clips, lower-level service parts are now available. Use service part W709919-S901 if the J-clip is completely detached from the seat cover and W715386-S424 if the clip is still partially attached. It is not necessary to replace the seat cover if only the J-clip is separating from the cover. Refer to PTS Home > Technical Assistance > Technical Support Videos > Section 501- Body and Paint > Seat J-Clips. For claiming, use causal parts from list below and labor operations 63100A and 63100A5. Causal Parts for claiming: Bronco/Bronco Sport/Escape/Explorer/Expedition/Navigator: 7862900 or 7862901 F-150/F-Super Duty: 1562900 or 1562901 Ranger/Maverick: 6062900 or 6062901
SSM 527762024-08-16. Service bulletin. Some 2020-2025 Explorer/Aviator vehicles may have a concern where the second row outboard manual/power seats do not fold, exhibit excess effort to fold, or do not slide forward/backward easily. Power or manual second row seats must be pushed forward manually during easy entry function since the assist spring will reduce but not eliminate manual effort. Refer to the Owner's Manua
SSM 524762024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
22G07 S12024-04-02. Service bulletin. UPDATE Supplement Announcement - Certain 2020-2022 Model Year Police Interceptor Utility Vehicles Equipped with a Low Band Frequency Noise Suppression Kit - Electromagnetic Compatibility Upgrade Owner letter added. First part submitted 08/03/23
TSB 24-20442024-03-07. Service bulletin. This article supersedes TSB 23-2181 to add 2024 vehicle model year. Some 2020-2024 Explorer/Aviator vehicles may exhibit a lack of audio and/or a water leak in the rear liftgate area and/or water in the spare tire area. The customer may indicate that this concern is more noticeable after a car wash or rainfall. To correct the condition, follow the Service Procedure to identify the leak path.
TSB 24-20432024-03-07. Service bulletin. This article supersedes TSB 23-2208 to add 2024 model year vehicles. Some 2020-2024 Explorer/Aviator non-hybrid vehicles may exhibit radio static and/or poor radio sound quality when moving. This may be more noticeable on AM radio stations. This may be caused by an electromagnetic interference concern
TSB 23-23472023-11-21. Service bulletin. This article supersedes TSB 23-2279 to update the Service Procedure. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a powertrain malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM). This may be due to the belt integrated starter generator (BISG). To correct this condition, follow the Service Procedure to diagnose and repair this symptom.
TSB 23-23072023-11-02. Service bulletin. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
SSM 519452023-10-06. Service bulletin. 2020-2023 Police Interceptor Utility vehicles may require level III ballistic panels to be replaced due to broken mounting tabs. Level III ballistic panel mounting tab service kits are now available (right LB5Z-78201B68-F and left LB5Z-78201B69-F). Replacement of the level III ballistic panel assembly is not required for this condition. Level IV ballistic panels do not have removable mounting tabs and still require complete panel replacement. Level III vs. level IV ballistic panels can be identified by a large roman numeral label on the panel or by the vehicle window sticker if equipped.
SSM 519372023-10-05. Service bulletin. Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.