# Service bulletin TSB\-20\-15\-002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10183951
- Published by NHTSA: 2020\-12\-08
- Manufacturer's number: TSB\-20\-15\-002
- Manufacturer's date: 2020\-11\-05
- NHTSA component: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; STRUCTURE

## NHTSA's summary

Technical Service Bulletin informing dealers an abnormal noise coming from the exhaust area and may occur due to vibration between the exhaust hanger and body side bracket and intructs dealers to replace the two identified hanger rubber parts with new parts.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10183951-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10183951-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Engine, Exhaust and emissions

## Vehicles listed

- MITSUBISHI MIRAGE
- 2014 to 2019 MITSUBISHI MIRAGE
- 2017 to 2020 MITSUBISHI MIRAGE G4

## Other bulletins for the same vehicles and component

- [TECH TALK 290](/bulletins/11029566.md), 2026-03-04, Other: ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; STEERING; VISIBILITY/WIPER; ENGINE. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- [TECH TALK 287](/bulletins/11021739.md), 2025-08-08, Other: STEERING; ENGINE; STRUCTURE:BODY; ELECTRICAL SYSTEM. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- [TECH TALK 279](/bulletins/10252695.md), 2024-04-04, Service bulletin: STRUCTURE:BODY:TAILGATE; WHEELS; STRUCTURE; EQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- [TSB\-23\-00\-004](/bulletins/10235609.md), 2023-05-04, Service bulletin: STRUCTURE. This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap\-film adhesive residue.
- [TSB\-22\-11\-001](/bulletins/10211532.md), 2022-05-09, Service bulletin: ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This Technical Service Bulletin was sent to dealers to provide an update to the Engine and Intake Manifold section of the affected Service Manuals and advises of new flange bolts available for use.
- [TSB\-21\-42A\-007](/bulletins/10203255.md), 2021-11-06, Service bulletin: STRUCTURE:BODY. This Technical Service Bulletin was sent to dealers updating content for the Body section of the affected Service Manual, Door.
- [TIN\-16\-11\-001](/bulletins/10194162.md), 2021-05-24, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE; EQUIPMENT. Affected Vehicles: 2014\-2015 Mirage \- Temporary back order of Long Block Engine Part Number listed in SC\-16\-001REV. This is a drefsult of higher than expected demand resulting from diagnosis of the knocking noise as outlined in the Service Campaign Bulletin.
- [SC\-16\-001REV](/bulletins/10194159.md), 2021-05-24, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE; EQUIPMENT. ECM Reprogramming for engine knocking noise \- Service Campaign \- Revised This bulletin supercedes SC\-16\-001, issued February, 2016 to add a Code 209 Restriction on new engines, detailed procedures required by dealers before ordering a new engine, and a Sample customer letter. Revisions are italicized and indicated by \- During cold start, the engine ECU may order inappropriate fuel amounts which may cause efangine noise.
- [SC\-16\-001](/bulletins/10194158.md), 2021-05-24, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE; EQUIPMENT. EMC Reprogramming for engine knocking noise \- Service Campaign \- During cold start, the engine ECU may order inapprokpriate fuel amounts which may caus e engine noise. This campaign bulletin instructs dealers to reprogram the ECM with new software on all affected vehicles. In rare cases, if the vehicle exhibits an enggine knocking noise, the fengine may need to be replaced.
- [NHTSA MMNA Publi](/bulletins/10194151.md), 2021-05-24, Service bulletin: ENGINE AND ENGINE COOLING; EQUIPMENT. MMNA submits this letter in accordance with 49 CFR Part 579.5 "Notices, bulletins, customersatisfaction campaigns, consumer advisories, and other communications." Enclosed is a copy of applicable instructions or explanations sent during the month of March 2016 to owfners, dealers, and/or purchasers of motor vehicles or equipment sold by MMNA.

JSON: [/v1/bulletins/10183951](/v1/bulletins/10183951)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB-20-15-002&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10183951&vehicle=Service%20bulletin%20TSB-20-15-002)