# Service bulletin ITB08\-021g

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10183903
- Published by NHTSA: 2020\-12\-08
- Manufacturer's number: ITB08\-021g
- Manufacturer's date: 2020\-11\-13
- NHTSA component: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\)

## NHTSA's summary

UPGRADING HDD NAVIGATION MAP DATA This bulletin is no longer active. Please discard previous versions of ITB08\-021.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10183903-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10183903-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Equipment and accessories

## Vehicles listed

- 2008 to 2009 INFINITI EX35
- 2009 INFINITI FX35
- 2009 INFINITI FX45
- 2007 to 2008 INFINITI G35
- 2008 to 2009 INFINITI G37
- 2008 to 2010 INFINITI M35
- 2008 to 2010 INFINITI M45
- 2008 to 2010 INFINITI QX56

## Other bulletins for the same vehicles and component

- [ITB19\-024C](/bulletins/10233657.md), 2023-04-04, Service bulletin: EQUIPMENT. DTC B00A0\-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB11\-034A](/bulletins/10201190.md), 2021-09-08, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT. VOLUNTARY SERVICE CAMPAIGN 2009 – 2010 EX35 NO START OR WARNING LIGHT ILLUMINATION DUE TO WATER IN ELECTRICAL HARNESS Service Campaign ID \# P1223 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# P1223. • Discard all previous versions of ITB11\-034.
- [ITB11021B](/bulletins/10192842.md), 2021-05-10, Service bulletin: EQUIPMENT; TIRES. SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In\-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked \(not moved\) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90° \(see Figure 1\). Moving vehicles as shown in this bulletin will prevent tire Flat Spotting. See this bulletin for further detail.
- [ITB14021B](/bulletins/10192822.md), 2021-05-10, Service bulletin: POWER TRAIN; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. SERVICE INFORMATION Replacement 5\-speed rear wheel drive Automatic Transmission \(A/T\) assemblies and replacement control valves \(valve bodies\) now come with blank Transmission Control Modules \(TCMs\). Blank TCMs come without software and must be programmed \(not reprogrammed\) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Infiniti electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- [ITB09041A](/bulletins/10192806.md), 2021-05-10, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:APPLIANCE:AIR CONDITIONER. IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location, ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o\-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O\-ring seal. See this bulletin for further detail.
- [ITB09063B](/bulletins/10192802.md), 2021-05-10, Service bulletin: EQUIPMENT:OTHER:LABELS; FORWARD COLLISION AVOIDANCE. SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Infiniti by request if certain criteria are met. This bulletinlists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- [ITB15021A](/bulletins/10192788.md), 2021-05-10, Service bulletin: EQUIPMENT; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE \- Do not replace the fuel filler cap if only the pin is needed. See this bulletin for further detail.
- [ITB15025](/bulletins/10192598.md), 2021-05-10, Service bulletin: BACK OVER PREVENTION; EQUIPMENT; WHEELS; SERVICE BRAKES; STEERING. SERVICE INFORMATION When servicing run flat tires or low profile tires: \- Special equipment and procedures are required to avoid damage. \- Specifically, Tire Pressure Monitor transmitters \(TPMS sensors\) can be damaged when improperly dismounting and mounting tires. \- TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. \- To avoid such damage, ensure that the tire changer being used and the operator of the tire changer are capable of servicing run flat and low profile tires. \- Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- [ITB14010B](/bulletins/10192578.md), 2021-05-10, Service bulletin: EQUIPMENT. SERVICE INFORMATION All parts listed in this bulletin's table are currently on parts restriction. If any of these parts are needed for any reason, order the part\(s\) using the order form in this bulletin. See this bulletin for further detail.
- [ITB99043G](/bulletins/10192533.md), 2021-05-10, Service bulletin: EQUIPMENT. SERVICE INFORMATION NOTE \- Failure to follow the procedures in this bulletin may result in the denial of a warranty claim. In an effort to protect the paint finish, Paint Guard Film \(PGF\) is applied on many new Infiniti vehicles. Paint Guard Film is a temporary white plastic protective film that is applied by the factory to the horizontal painted surfaces of the vehicle. The PGF protects the paint finish during vehicle handling, transportation and storage from harmful elements such as acid rain,iron particles, bird droppings, tree sap and other environmental contaminants. NOTE \- Paint Guard Film CANNOT remain on the vehicle for more than six months after the vehicle's manufacture date. PGF must be removed at the end of six months. See this bulletin for further detail.

JSON: [/v1/bulletins/10183903](/v1/bulletins/10183903)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB08-021g&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10183903&vehicle=Service%20bulletin%20ITB08-021g)