WenmarOpen by Wenmar Pro

Service bulletin 08-074-20 REV. C

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10183094
Published by NHTSA2020-11-30
Manufacturer's number08-074-20 REV. C
Manufacturer's date2020-10-23
NHTSA componentEQUIPMENT; ELECTRICAL SYSTEM; STEERING

NHTSA's summary

Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Equipment and accessories, Steering

Vehicles listed
JEEP GLADIATOR2020
JEEP WRANGLER2018, 2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V7410002025-10-30. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY
24V7200002024-09-27. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY
24V6520002024-09-05. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
20200242020-01-24. Steering
19V3200002019-04-23. EQUIPMENT
20191382019-03-15. Steering
19V2010002019-03-14. STEERING
20185392018-09-28. Steering
18V5240002018-08-09. ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
20182812018-05-25. Steering

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
08-358-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-365-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-364-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-363-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-358-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-365-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-364-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
08-363-262026-10-16. Service bulletin. Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: ● 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). ● The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
91009002026-09-17. Service bulletin. Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
16C Combo Rev32026-08-13. Warranty extension. EMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp 16C The instrument panel cluster on about 32,587 of the above vehicles may have an inoperable check engine/malfunction indicator lamp (CEL/MIL). (JT) vehicles: CEL/MIL and cargo lamp indicator function are swapped. (JL) vehicles: CEL/MIL will not turn on. The CEL/MIL in and of itself will not affect emissions. However, if there was an emission issue that would require illumination of the CEL/MIL, the customer would not be alerted. The vehicle would be non-compliant to the OBD II regulation.