WenmarOpen by Wenmar Pro

Service bulletin 9004309

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10182995
Published by NHTSA2020-11-30
Manufacturer's number9004309
Manufacturer's date2020-10-14
NHTSA componentELECTRICAL SYSTEM:SOFTWARE; STEERING

NHTSA's summary

GEAR, Power Steering When installing this gear refer to published service information. The power steering pump software must be updated, and vehicle configuration updated to ensure proper steering feel.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Steering, Software

Vehicles listed
JEEP GLADIATOR2020
JEEP WRANGLER2018, 2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
18V3320002018-05-17. ELECTRICAL SYSTEM:SOFTWARE; VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM:WIRING

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
ReferenceY402024-03-18. Service bulletin. Customer Satisfaction Notification Y40 Control Module Software Updates
BulletinA2023-07-31. Service bulletin. Customer Satisfaction Notification ZD7 - Radio Software Update
24007212022-10-17. Service bulletin. Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
18049212022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following DTCs have been set: P225D-00 - Nox Sensor 1/1 Performance - Signal Stuck Low. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Control. P065A - Generator System Performance. P00F4-00 - Humidity Sensor Circuit Low. P00AF-00 -Turbocharger Boost Control Module "A" Performance. P0106-00 - Manifold Absolute Pressure Sensor Performance. P20FB-00 - Reductant Pump 2 Control Performance. P200A-00 - Intake Manifold Runner Performance - Bank 1. P200B-00 - Intake Manifold Runner Performance - Bank 2. P2610 - PCM Internal Engine Off Timer Performance. P0087-00 - Fuel Rail Pressure Too Low (with rapid apply and release of accelerator pedal). P015E-00 - Excessive Time To Enter Closed Loop Fuel Timing Control. P01CB-00 - Cylinder 1 Injection Timing Performance - Over Retarded. P01CC-00 - Cylinder 1 Injection Timing Performance - Over Advanced. P01CD-00 - Cylinder 2 Injection Timing Performance - Over Retarded. P01CE-00 - Cylinder 2 Injection Timing Performance - Over Advanced. P01CF-00 - Cylinder 3 Injection Timing Performance - Over Retarded. P01D0-00 - Cylinder 3 Injection Timing Performance - Over Advanced. P01DL-00 - Cylinder 4 Injection Timing Performance - Over Retarded. P01D2-00 - Cylinder 4 Injection Timing Performance - Over Advanced. P01D3-00 - Cylinder 5 Injection Timing Performance - Over Retarded. P01D4-00 - Cylinder 5 Injection Timing Performance - Over Advanced. P01D5-00 - Cylinder 6 Injection Timing Performance - Over Retarded. P01D6-00 - Cylinder 6 Injection Timing Performance - Over Advanced. P0534-00 - A/C Refrigerant System "A" Charge Loss. P204F-00 - Reductant System Performance. P2199-00 - Intake Air Temperature Sensor 1/2 Correlation.
18053202022-09-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs.P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the softwareupdate.In addition the customer may notice one or more of the following: The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
18013202022-09-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following Diagnostic Trouble Codes (DTCs) have been set:P0607 - ECU Internal Performance. P0506 - Idle Speed Performance Lower Than Expected
08-133-212022-08-22. Service bulletin. UAQ and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to: 39.6.The repair procedure must be followed step by step. If the radio is not updated with the correct software level at the correct time the radio can be damaged. If the radio was damaged by not following the repairprocedure the radio may need to be replaced. Customers may experience one or more of the following: Lost radio presets. SXM favorite song not displaying/playing. Radio display screen is black, intermittent. Radio freeze intermittent. Incorrect navigation address/location/directions. Bluetooth pair or connection issue. Radio channel change by itself. SXM icon inoperative. Backup camera has black display screen. High pitch chime noise. Contact list not loading. Device not supported message. Remote app inoperative. Travel-Link fuel price incorrect. Backup camera gridlines missing. Unable to adjust volume. In addition the following enhancements are included: Heavy Duty (HD)Truck USB HUB improvements. HD Truck heated steering wheel improvements.
08-074-20 REV. D2020-12-28. Service bulletin. Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
08-074-20 REV. D2020-12-21. Service bulletin. Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
08-097-202020-11-30. Service bulletin. UAQ and UCQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.