Service bulletin DRW34

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10182129
Published by NHTSA	2020-11-04
Manufacturer's number	DRW34
Manufacturer's date	2020-10-29
NHTSA component	EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY; ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

2021 CX-9 AND CX-5 MAZDA CONNECT SETTINGS CONCERN: Concern Outline: It is not possible to customize the “View Monitor”, “Parking Sensor” and Safety (hands free liftgate) settings as they are not displayed on the Mazda Connect screen, due to an inappropriate setting in the software on the subject vehicles involved in this campaign. Outline of Repair: Perform a Factory Reset on the Mazda Connect Screen. Note: Modified software will be incorporated into mass-production vehicles beginning November 3, 2020. Certain CX-5 and CX-9 vehicles produced before the mass-production change, will be reworked before shipment.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Equipment and accessories, Glass, wipers and mirrors, Software

Vehicles listed
MAZDA CX-5	2021
MAZDA CX-9	2021

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SA-004-22b	2022-06-04. Service bulletin. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
09-021-21-3818b	2021-10-02. Service bulletin. All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.230 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of Mazda’s continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update. NOTE: If the customer has customized MAZDA CONNECT with something like a different background using unauthorized software, make sure they know the following information before updating MAZDA CONNECT to avoid any issues later on. Updating MAZDA CONNECT to the latest version will erase any customization created by unauthorized software. Unauthorized customization software will not work on the latest version of MAZDA CONNECT software. The latest version of MAZDA CONNECT software cannot be rolled back to an earlier version. Mazda does not recommend unauthorized customization of MAZDA CONNECT due to the possibility of unexpected problems. Any issues related to this will not be covered under Mazda warranty policy.
SA-008-21	2021-02-06. Service bulletin. DTC P0942:49 is missing from the Workshop Manual on MGSS. Follow the repair procedure below to repair the vehicle until the information is added.
SA-003-20f	2021-01-06. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-031-20j	2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-031-20i	2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
DRW34a	2020-12-04. Service bulletin. DRW34 - 2021 CX-9 AND CX-5 MAZDA CONNECT SETTINGS CONCERN. Concern Outline: It is not possible to customize the View Monitor, Parking Sensor and Vehicle - Doors > Hands-Free Liftgate settings as they are not displayed on the Mazda Connect screen, due to an inappropriate setting in the software on the subject vehicles involved in this campaign. Outline of Repair: Perform a Factory Reset on the Mazda Connect Screen.
SA-066-20	2020-10-05. Service bulletin. When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always do the following: • Use the GR8 battery charger SST to maintain battery voltage. See SA-063/20. • Use M-MDS hardware that is in good working condition. CAUTION: If the GR8 is not used or if the M-MDS hardware is not in good working condition, a control unit failure may occur.