# Service bulletin NTB20\-046b

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10179611
- Published by NHTSA: 2020\-09\-11
- Manufacturer's number: NTB20\-046b
- Manufacturer's date: 2020\-08\-21
- NHTSA component: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS

## NHTSA's summary

VOLUME KNOB DOES NOT FUNCTION PROPERLY This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10179611-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10179611-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Equipment and accessories, Wiring and fuses

## Vehicles listed

- 2019 to 2020 NISSAN ALTIMA
- 2018 to 2020 NISSAN KICKS
- 2019 to 2020 NISSAN MURANO
- 2020 NISSAN VERSA

## Other bulletins for the same vehicles and component

- [NTB22\-020](/bulletins/10212011.md), 2022-05-20, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS. SERVICE INFORMATION FOR BRAKE SWITCH ADJUSTMENT FOR DTC C1142 AND/OR C1116 STORED SERVICE INFORMATION DTC C1142 \(PRESS SEN CIRCUIT\) and/or C1116 \(STOP LAMP SW\) may be stored if the Stop Lamp Switch and/or the Brake Pedal Position Switch are out of adjustment. Before replacing any components for DTCs C1142 \(PRESS SEN CIRCUIT\) and/or C1116 \(STOP LAMP SW\), stored as past or current, confirm that the Stop Lamp Switch and the Brake Pedal Position Switch are properly adjusted. If either the Stop Lamp Switch and/or the Brake Pedal Position Switch are found to be out of adjustment, adjust them as per the ESM, and then clear the DTCs and perform DTC confirmation. • Refer to the ESM: BRAKES \> BRAKE SYSTEM \> PERIODIC MAINTENANCE \> BRAKE PEDAL \> Adjustment
- [NTB20\-046c](/bulletins/10179612.md), 2020-09-11, Service bulletin: ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. VOLUME KNOB DOES NOT FUNCTION PROPERLY This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

JSON: [/v1/bulletins/10179611](/v1/bulletins/10179611)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB20-046b&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10179611&vehicle=Service%20bulletin%20NTB20-046b)