WenmarOpen by Wenmar Pro

Service bulletin 21-040-20

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10178679
Published by NHTSA2020-08-24
Manufacturer's number21-040-20
Manufacturer's date2020-07-02
NHTSA componentPOWER TRAIN

NHTSA's summary

Transmission Case Oil Leak This bulletin involves tightening the lower transmission bolts to updated torque specifications to possibly eliminate a leak at the case split line of the transmission. Customers may notice (possibly transmission) fluid leaking on the ground from the left front of the vehicle.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
FIAT 500X2019
JEEP RENEGADE2019

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
21-040-252025-10-08. Service bulletin. 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1DB7-00 - Torque Converter Clutch Performance.
18006232023-07-31. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience the following: ? Engine Stop/Start does not work as expected and it is often automatically deactivated. Customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P2110 - Electronic Throttle Control System Bank 1 - Forced Limited RPM. ? P2173 - High Airflow/Vacuum Leak Detected (Slow Accumulation). ? U0100 - Lost Communication With ECM/PCM. ? P0456 - EVAP System Small Leak. NOTE: If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. ? P1CEA - Boost Side EVAP Purge System Performance. In addition, the customer may also experience the following: ? The vehicle will not crank if the ECM gets hotter than 50 °C (122 °F). ? Intermittent no-crank when first starting the vehicle. The following DTC has been changed from a one trip fault to a two trip fault: ? P0607 - ECU Internal Performance. This bulletin involves reprogramming the PCM with the latest available software.
18051232023-05-30. Service bulletin. Flash: Powertrain Control Module (PCM) Updates **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTC)s: ? P24D1-00 - Particulate Matter Sensor Regeneration Incomplete. NOTE: This software update will help prevent P24D1-00 from setting. Refer to all applicable published service bulletins for detailed repair procedures and labor times regarding this DTC. ? P2002-00 - Diesel Particulate Filter (DPF) Efficiency based on Particulate Matter (PM) sensor monitoring. NOTE: If DTC P2002 is present it will require DPF and PM sensor replacement. Refer to all applicable published service bulletins for detailed repair procedures and labor times regarding Diesel Particulate Matter Sensor (DPM) replacement. ? P24AE-00 - Particulate Matter Sensor Circuit. ? P24B0-00 - Particulate Matter Sensor Circuit Low. ? P24B1-00 - Particulate Matter Sensor Circuit High. ? P24B2-00 - Particulate Matter Sensor Circuit Intermittent. ? P24D0-00 - Particulate Matter Sensor Supply Voltage Circuit Low. ? P24D3-00 - Particulate Matter Sensor Supply - Circuit Voltage Above Threshold. ? P24AF-00 - Particulate Matter Sensor Circuit Performance. ? P24B5-00 - Particulate Matter Sensor Heater Control Circuit Low. ? P24B6-00 - Particulate Matter Sensor Heater Control Circuit High. ? P24B7-00 - Particulate Matter Sensor Heater Resistance. ? P24DA-00 - Particulate Matter Sensor Exhaust Sample Error Bank 1. ? U05A4-00 - Particulate Matter Sensor Received Invalid Data From ECM - PCM. ? U02A3-00 - Loss of Communication with PM Sensor Module. ? P24B2-00 - Particulate Matter Sensor Circuit Intermittent.** Customers may also experience the following: ? More frequent Diesel Particulate Filter (DPF) regenerations. NOTE: This software update will help reduce smoke emissions and reduce DPF regeneration events. This bulletin involves reprogramming the PCM wit
18047212023-01-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following: After a short trip and shutting the engine off for 5 - 10 minutes, vehicle exhibits a long crank/start condition.
21040202023-01-09. Service bulletin. Transmission Case Oil Leak This bulletin involves tightening the lower transmission bolts to updated torque specifications to possibly eliminate a leak at the case split line of the transmission. Customers may notice (possibly transmission) fluid leaking on the ground from the left front of the vehicle.
21044202022-10-17. Service bulletin. Flash: Transmission Control Module (TCM) Updates - AN-BQ-18-20200921 Refer to China Joint Venture (JV) released document AN-BQ-18-20200921, for details on this service action.
S19080001022022-10-17. Service bulletin. (Rev. A) Power Inverter Load Ratings
18099202022-10-17. Service bulletin. Flash: Powertrain Diagnostic and System Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: P2002-00 - Diesel Particulate Filter Flow Resistance Monitoring Too High Level 2 Component or System Operation Obstructed or Blocked. Customers equipped with a 6-SPD C635 Dual Dry Clutch Automatic Transmission (Sales code DA1) may also experience an injector knocking noise during acceleration (without MIL illumination).
18094202022-10-17. Service bulletin. Flash: Powertrain Diagnostic and System Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
S20180000082022-10-17. Service bulletin. Engine Surge Feel and/or Diagnostic Trouble Code P0299 ? Turbo Underboost Condition After Updating The Powertrain Control Module (PCM) Software. (ETL, ETM, ETN Engines)