# Service bulletin SSM 48915

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10177034
- Published by NHTSA: 2020\-07\-07
- Manufacturer's number: SSM 48915
- Manufacturer's date: 2020\-06\-22
- NHTSA component: LANE DEPARTURE

## NHTSA's summary

2020 Transit, F\-Super Duty, F\-53 Motorhome/F\-59 Commercial, 2021 F\-650/F\-750/E\-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual \(WSM\) section 419\-01. Do not submit a claim for this condition.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10177034-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10177034-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Vehicles listed

- 2021 FORD E\-150
- 2021 FORD E\-250
- 2021 FORD E\-350
- 2021 FORD E\-450
- 2020 FORD F\-250 SD
- 2020 FORD F\-350 SD
- 2020 FORD F\-450 SD
- 2020 FORD F\-53
- 2020 FORD F\-550 SD
- 2021 FORD F\-650
- 2021 FORD F\-750 SD
- 2020 FORD TRANSIT

## Recalls for the same vehicles and component

- [25V686000](/recalls/nhtsa/25V686000.md), 2025-10-10: BACK OVER PREVENTION:SOFTWARE
- [25V442000](/recalls/nhtsa/25V442000.md), 2025-06-27: BACK OVER PREVENTION:SOFTWARE
- [22V644000](/recalls/nhtsa/22V644000.md), 2022-08-26: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [20V575000](/recalls/nhtsa/20V575000.md), 2020-09-23: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
- [20V175000](/recalls/nhtsa/20V175000.md), 2020-03-23: ELECTRONIC STABILITY CONTROL \(ESC\); ELECTRICAL SYSTEM:WIRING; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP

## Other bulletins for the same vehicles and component

- [SSM 54720](/bulletins/11031263.md), 2026-04-10, Service bulletin: ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020\-2026 Ford and Lincoln vehicles equipped with blind spot information system \(BLIS\) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster \(IPC\). This may also be accompanied by diagnostic trouble codes \(DTCs\) B118C:11 and/or B118C:15 stored in the driver door module \(DDM\), and/or B118D:11 and/or B118D:15 stored in the passenger door module \(PDM\). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z\-14A411\-B to resolve the concern.
- [25N17](/bulletins/11030282.md), 2026-03-27, Other: LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015\-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
- [SSM 54313](/bulletins/11024526.md), 2025-10-28, Service bulletin: LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020\-2025 various Ford and Lincoln vehicles equipped with blind spot information system \(BLIS\) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster \(IPC\). This may also be accompanied by diagnostic trouble codes \(DTCs\) B118C:11 and/or B118C:15 stored in the driver door module \(DDM\), and/or B118D:11 and/or B118D:15 stored in the passenger door module \(PDM\). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z\-14A411\-B to resolve the concern.
- [22M03](/bulletins/10238875.md), 2023-07-07, Service bulletin: LANE DEPARTURE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA. Certain 2017\-2020 Model Year Continental and Super Duty, 2018\-2020 Navigator, 2020 Aviator, and 2020 Explorer Vehicles Replace Front and/or Side Cameras if Foggy
- [TSB 23\-2154](/bulletins/10236575.md), 2023-05-23, Service bulletin: BACK OVER PREVENTION:SOFTWARE; POWER TRAIN. 2021\-2022 F\-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020\-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2021\-2023 Bronco with the 2.3L or 2.7L engine having charging system diagnostics performed in the Workshop Manual \(WSM\) may experience the generator voltage desired \(GENVDSD\) parameter identification \(PID\) missing from the powertrain control module \(PCM\) PID list in the Ford Diagnosis And Repair System \(FDRS\) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
- [TSB 23\-2082](/bulletins/10233593.md), 2023-04-04, Service bulletin: POWER TRAIN; BACK OVER PREVENTION:SOFTWARE. Some 2020\-2022 F\-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble codes \(DTC\) P0315, P054F, P054E, P2A00, P2A01, and/or P02ED stored in the powertrain control module \(PCM\). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and the transmission control module \(TCM\).
- [SSM 51263](/bulletins/10228880.md), 2023-01-06, Service bulletin: BACK OVER PREVENTION; STRUCTURE:BODY:DOOR. Some 2015\-2023 F\-150, 2017\-2022 F\-Super Duty, and 2019\-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off\-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
- [SSM 51254](/bulletins/10228871.md), 2023-01-05, Service bulletin: BACK OVER PREVENTION:SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Some 2020\-2022 Escape/Corsair/F\-53 Motorhome/F\-59 Commercial Stripped Chassis, 2021\-2023 F\-650/F\-750/E\-Series, and 2021\-2022 Bronco Sport vehicles may exhibit an intermittent no crank/no start condition and/or an intermittent blank instrument panel cluster \(IPC\)/SYNC touchscreen. This may be due to the software in the gateway module \(GWM\). To correct the condition, reprogram the GWM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards \(SLTS\) Manual.
- [SSM 51111](/bulletins/10222255.md), 2022-10-03, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE; FORWARD COLLISION AVOIDANCE. Some 2020\-2022 F53 Motorhome built on or before 06\-Oct\-2022 and 2021\-2022 E\-Series vehicles built on or before 09\-Mar\-2021 may exhibit a Service AdvanceTrac and Pre\-Collision Assist Not Available message in the cluster with diagnostic trouble code \(DTC\) C0051 stored in the anti\-lock brake system \(ABS\) module. Cruise control may also be inoperative. To correct the condition, reprogram the ABS module using the latest software level of the Integrated Diagnostic System \(IDS\). For claiming, use causal part number 2C219 and applicable labor times in Section 10 of the Service Labor Time Standards \(SLTS\) Manual.
- [TSB 22\-2254](/bulletins/10214878.md), 2022-07-01, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Some 2019\-2020 Edge/F\-150/Fusion/Continental/MKZ/Nautilus, 2019\-2021 Mustang/Ranger/Transit Connect, 2020\-2021 EcoSport/Escape/Expedition/Explorer/F\-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020\-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module \(APIM\) software.

JSON: [/v1/bulletins/10177034](/v1/bulletins/10177034)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM%2048915&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10177034&vehicle=Service%20bulletin%20SSM%2048915)