# Service bulletin Bulletin 2020\-2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10176805
- Published by NHTSA: 2020\-07\-01
- Manufacturer's number: Bulletin 2020\-2
- Manufacturer's date: 2020\-06\-20
- NHTSA component: ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC

## NHTSA's summary

Vehicle may indicate brake light switch failure. One of the probable cause is the adjustment of the brake light switch/low pressure switch.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10176805-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10176805-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes, Electrical system

## Vehicles listed

- 2019 to 2020 CAN\-AM RYKER

## Recalls for the same vehicles and component

- [22V799000](/recalls/nhtsa/22V799000.md), 2022-10-22: ELECTRICAL SYSTEM:WIRING
- [2022605](/recalls/tc/2022605.md), 2022-10-21: Electrical

## Other bulletins for the same vehicles and component

- [TST 137209](/bulletins/11003267.md), 2024-07-04, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN; SUSPENSION. RYKER YAW Rate \- SAS Sensor Faults These 3 faults \(C0063 and/or C0051 and \*C006C\) can be triggered if the front suspension has excessive play or the front wheel alignment is out of specification
- [TST 137209](/bulletins/10229607.md), 2023-01-12, Service bulletin: SUSPENSION; SERVICE BRAKES; ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); ELECTRICAL SYSTEM. Yaw rate sensor faults might be triggered due to loose front suspension components.
- [Bulletin 2023\-2](/bulletins/10226796.md), 2022-12-01, Service bulletin: ELECTRICAL SYSTEM. This bulletin is the detailed repair procedure if the position light and flasher electrical harness in the front fenders have rubbed on the tires wearing the insulating sheath.
- [Bulletin 2019\-8](/bulletins/10194474.md), 2021-05-26, Service bulletin: SERVICE BRAKES; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; STEERING. Handlebar may have a play in rotation due to unequal clamping surface Brake oil reservoir diaphragm may be incorrectly installed
- [Bulletin 2019\-6](/bulletins/10194473.md), 2021-05-26, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; EQUIPMENT; ELECTRICAL SYSTEM. Warranty Bulletin no 2019\-6 Speed Sensor Wiring Harness\-Corrugated Tube Installation\- Unregistered Vehicles Only. The front speed sensor wiring harness could get pinched during the front fender installation

JSON: [/v1/bulletins/10176805](/v1/bulletins/10176805)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20Bulletin%202020-2&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10176805&vehicle=Service%20bulletin%20Bulletin%202020-2)