# Service bulletin ITB15\-019a

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10176214
- Published by NHTSA: 2020\-06\-09
- Manufacturer's number: ITB15\-019a
- Manufacturer's date: 2020\-05\-13
- NHTSA component: ELECTRICAL SYSTEM

## NHTSA's summary

CONFIGURATION FOR BLANK REPLACEMENT BCM This bulletin is no longer applicable. Discard previous versions of ITB15\-019.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10176214-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10176214-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system

## Vehicles listed

- 2003 to 2008 INFINITI FX35
- 2003 to 2008 INFINITI FX45
- 2011 to 2012 INFINITI G25
- 2003 to 2008 INFINITI G35
- 2007 INFINITI G35 COUPE
- 2008 to 2013 INFINITI G37
- 2006 to 2010 INFINITI M35
- 2006 to 2010 INFINITI M45
- 2015 INFINITI Q40
- 2014 to 2015 INFINITI Q60

## Recalls for the same vehicles and component

- [2010129](/recalls/tc/2010129.md), 2010-04-22: Electrical
- [08V521000](/recalls/nhtsa/08V521000.md), 2008-10-07: ELECTRICAL SYSTEM:SOFTWARE; AIR BAGS
- [2003143](/recalls/tc/2003143.md), 2003-05-29: Electrical

## Other bulletins for the same vehicles and component

- [ITB13\-052E](/bulletins/11002539.md), 2024-06-28, Service bulletin: ELECTRICAL SYSTEM. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB13\-006D](/bulletins/11002537.md), 2024-06-28, Service bulletin: ELECTRICAL SYSTEM. CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB10\-029C](/bulletins/11001653.md), 2024-06-14, Service bulletin: ELECTRICAL SYSTEM. CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB11\-046B](/bulletins/10212025.md), 2022-05-20, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\). VOLUNTARY SERVICE CAMPAIGN CALL WAITING FUNCTION NAVIGATION UPDATE Service Campaign ID \# P1235 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# P1235. • Discard all previous versions of ITB11\-046.
- [ITB10\-068A](/bulletins/10212024.md), 2022-05-20, Service bulletin: ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE; ELECTRICAL SYSTEM. VOLUNTARY SERVICE CAMPAIGN 2011 G25; ENGINE CONTROL MODULE \(ECM\) REPROGRAMMING Service Campaign ID \# P0385 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# P0385. • Discard all previous versions of ITB10\-068.
- [ITB22\-006](/bulletins/10208943.md), 2022-03-12, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicle’s 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. • Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. • Battery voltage should not exceed 16V during a reprograming operation.
- [ITB13\-052D](/bulletins/10208933.md), 2022-03-12, Service bulletin: ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB13\-006C](/bulletins/10208930.md), 2022-03-12, Service bulletin: ELECTRICAL SYSTEM. CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB10\-029B](/bulletins/10207844.md), 2022-02-09, Service bulletin: ELECTRICAL SYSTEM. CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB16008](/bulletins/10192745.md), 2021-05-10, Service bulletin: ELECTRICAL SYSTEM. IF YOU CONFIRM The MIL is "ON" with DTC P0603 \(ECM BACK UP/CIRCUIT\). ACTION 1. Confirm that the battery voltage is 11 volts, or more, with the ignition ON \(engine OFF, not running\). 2. Erase DTC 3. Perform DTC confirmation steps in the Service Procedure. 4. Confirm 1st trip DTC P0603 is not stored. NOTE: P0603 is often the result of low battery voltage, discharged battery or battery terminal disconnections. Please see this bulletin for furtner details.

JSON: [/v1/bulletins/10176214](/v1/bulletins/10176214)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB15-019a&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10176214&vehicle=Service%20bulletin%20ITB15-019a)