Service bulletin 20NA094
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10175772 |
| Published by NHTSA | 2020-05-26 |
| Manufacturer's number | 20NA094 |
| Manufacturer's date | 2020-04-28 |
| NHTSA component | PARKING BRAKE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STEERING; ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
This informational bulletin provides information on the Steering Assist Reduced, Service Stabilitrak and/or Park Brake Released message being displayed on the Instrument Panel Cluster (IPC) due to low voltage being received by the brake or Power Steering Control Module.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Brakes, Electrical system, Steering, Instrument cluster, Parking brake, Software
| CHEVROLET EQUINOX | 2018 |
|---|---|
| GMC TERRAIN | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 20-NA-132 | 2024-04-05. Service bulletin. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements. |
|---|---|
| 07-08-49-020R | 2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| PIP5632G | 2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| PIP4902Q | 2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| PIP5814 | 2023-01-30. Service bulletin. This Preliminary information communicates that there some service parts released to dealers missing software. |
| PIT5195G | 2022-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle. |
| 17427 | 2021-04-30. Service bulletin. Condition Certain 2018 model year GMC Terrain vehicles equipped with a trailer package (RPO V92) may have a trailer turn signal and brake lamp that is inoperative on a connected trailer due to an incorrect calibration. Correction Dealers are to reprogram the body control module. |
| 070849020M | 2021-04-16. Service bulletin. IPC Odometer Programming Method Quick Reference Guide |
| 17-NA-337 | 2021-04-15. Service bulletin. All or Some Options May Be Missing from Driver Information Center (DIC) “Info Pages” Menu Due to Them Not Being Selected Condition Some customers may comment that with the “Info” option selected from the main menu (1), the “Info Pages” are blank (2) when scrolling up and down. If information is present when scrolling up and down, they may also comment that certain items are missing when compared to other like vehicles Cause This condition may be caused when all/some of the options not being selected in the “active info pages” menu. Correction If this concern is encountered, determine if all/any of the selections in the “active info pages” menu are not selected. To do this, follow the steps listed below. |
| 17-NA-330 | 2021-04-15. Service bulletin. Normal Characteristic – Push to Talk Button on Steering Wheel Control is Inoperative Condition Some customers may comment on one of the following conditions: 1. The push to talk button on the steering wheel control is inoperative when there is no phone device is paired with the vehicle. Note: The push to talk button, however, still answer OnStar hands-free calls (if equipped). 2. Cannot delete USB names from the radio display. The Radio displays the names of USB drives that were previously installed and have been removed. Cause This condition may be due to one of the following: Condition 1, no action is required. It is normal operation if you do not have a phone device paired with the vehicle via Bluetooth. Condition 2, the radio displays the last 3 sources used for the radio like AM, FM, XM, Bluetooth device streaming music or USB drive. The sources are highlighted/actively listed even after the source is removed from the system. To delete the name of the USB from the radio display, push the more button on the display and select another radio sources like AM, FM or XM. Note: The radio will show the last 3 audio sources after removed, as shown in the illustration above Correction DO NOT replace the radio assembly as this is a normal design characteristic for the infotainment system. |