Service bulletin 08-033-20
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10175136 |
| Published by NHTSA | 2020-05-18 |
| Manufacturer's number | 08-033-20 |
| Manufacturer's date | 2020-03-07 |
| NHTSA component | POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH |
NHTSA's summary
Intermittent No Crank No Start This bulletin involves inspecting the ground wire to engine block fastener and replacingif necessary. The customer may comment on the following:A no start and/or intermittent no start condition.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline, Automatic transmission
| RAM 1500 | 2020 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| S1808000152 | 2023-04-17. Service bulletin. CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes (DTCs) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042-54 Brake Pedal Missing Calibration |
|---|---|
| 1800821 | 2022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set: P225D-00 - Nox Sensor 1/1 Performance - Signal Stuck Low. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Control. P065A - Generator System Performance. P00F4-00 - Humidity Sensor Circuit Low. Improved VGT cleaning to reduce false failures for P00AF field issue. P0106-00 - Manifold Absolute Pressure Sensor Performance. P20FB-00 - Reductant Pump 2 Control Performance. P200A-00 - Intake Manifold Runner Performance - Bank 1. P200B-00 - Intake Manifold Runner Performance - Bank 2. P2610 - PCM Internal Engine Off Timer Performance. Change DTC number from P0101-00 to P0109-00 - Mass Air Flow Sensor Performance. P015E - Excessive Time to Enter Closed Loop Fuel Timing Control. P0534-00 - AC Refrigerant System A Charge Loss. P26FB-00 - EGR Cooler Bypass Control Stuck Closed Bank 1. P04DB-00 - Crankcase Ventilation System Disconnected. P204F-00 - Reductant System Performance. P2D2D-00 - Cold Start Intake Manifold Runner Performance Bank 1. P2D2E-00 - Cold Start Intake Manifold Runner Performance Bank 2. P2199-00 - Intake Air Temperature Sensor 1 / 2 Correlation. P22FA-00 - NOX Sensor Performance - Slow Response High To Low Bank 1 Sensor 1. P2002-00 - Diesel Particulate Filter Efficiency Below Threshold. P0087-00 - Fuel Rail Pressure Too Low. P0128-00 - Thermostat Rationality(additional software enhancement). P0300-00 - Multiple Cylinder Misfire(cold ambient temperature). P0301-00 - Cylinder 1 Misfire(cold ambient temperature). P0302-00 - Cylinder 2 Misfire(cold ambient temperature). P0303-00 - Cylinder 3 Misfire(cold ambient temperature). P0304-00 - Cylinder 4 Misfire(cold ambient temperature). P0305-00 - Cylinder 5 Misfire(cold ambient temperature). |
| S2018000009 | 2022-09-26. Service bulletin. Malfunction Indicator Lamp (MIL) Illuminated. Diagnostic Trouble Codes (DTCs) P00AF ? Turbocharger Boost Control Module ?A? Performance and/or P226C ? Turbocharger Boost Control Module ?A? Slow Response. |
| 1801120 | 2022-09-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience the following: A hesitation or rough feeling during engine-starting. Extended or longer than usual engine crank time. This conditions usually happens after a cold engine start and the vehicle is turnedoff and turned on within 3-5 minutes this will result in an extended or longer crank than usual before the vehicle restarts. |
| S2125000002 | 2022-09-26. Service bulletin. Customer complaint includes a Mil-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM: |
| 1802221 | 2022-09-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the one or more of the following DTCs have been set:P0300 - Multiple Cylinder Misfire. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P0305 - Cylinder 5 Misfire. P0306 - Cylinder 6 Misfire. P0307 - Cylinder 7 Misfire. P0308 - Cylinder 8 Misfire. The customer may also experience one or more of the following:Rough idle/misfire only after cold start Auto Park system is unable to be manually over-ridden after an Auto Park event. Auto Park disabled message will not display in cluster. ECO light does not illuminate in the cluster when Multiple Displacement System (MDS) is active(EMEA, LATAM and APAC). 2-3 kph (1.3-1.9 mph) difference between cruise set speed and the actual vehicle speed(EMEA, LATAM and APAC). Bump sensation during a coast down with light acceleration. Abnormal vibration when accelerating lightly during stop and go driving conditions. |
| S1925000008 | 2022-06-27. Service bulletin. Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes (DTCs) P208B ? Reductant Pump 1 Control Performance, and/or P20E8 ? Reductant Pressure Too Low, Set. |
| S2125000002 | 2022-05-31. Service bulletin. Customer complaint includes a Mil-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM: |
| 18-062-20 REV. A | 2021-03-01. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the one or more of the following DTCs have been set:P0300 - Multiple Cylinder Misfire. P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P0305 - Cylinder 5 Misfire. P0306 - Cylinder 6 Misfire. P0307 - Cylinder 7 Misfire. P0308 - Cylinder 8 Misfire. The customer may experience one or more of the following:Rough idle/misfire only after cold start ECO light does not illuminate in the cluster when Multiple Displacement System (MDS) is active(EMEA, LATAM and APAC). 2-3 kph (1.3-1.9 mph) difference between cruise set speed and the actual vehicle speed(EMEA, LATAM and APAC). |
| S2008000196 | 2021-03-01. Service bulletin. Diagnostic Trouble Code (DTC) P065A ? Generator System Performance, Additional Information. |