# Service bulletin 9004099

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10174101
- Published by NHTSA: 2020\-04\-27
- Manufacturer's number: 9004099
- Manufacturer's date: 2020\-03\-18
- NHTSA component: EXTERIOR LIGHTING

## NHTSA's summary

LAMP, Liftgate If you have a tail lamp assembly with moisture and/or water in the assembly, please do the following: 1.\) Call FCA Redacted Content \(If no answer, leave a message\) 2.\) Photograph the defect on the vehicle 3.\) Provide the VIN 4.\) Please send an email containing the VIN\(s\) and defect images to FCA Redacted Content and FCA Redacted Content If no response in 15 minutes, proceed with repair.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10174101-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10174101-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Lighting

## Vehicles listed

- 2018 to 2020 DODGE DURANGO

## Recalls for the same vehicles and component

- [2021372](/recalls/tc/2021372.md), 2021-06-11: Lights And Instruments

## Other bulletins for the same vehicles and component

- [0812323](/bulletins/10239948.md), 2023-07-31, Service bulletin: EXTERIOR LIGHTING. License Plate LED Light Inoperative \- Moisture Visible Within the Lens The customer may experience the following: ? There is a potential for water intrusion which over time could lead to an inoperable license plate lamp. Customers may comment on one or more of the following: ? License plate LED light is inoperable. ? Moisture in the license plate lamp housing. This bulletin involves inspecting the license plate LED lamp for being inoperative or visible signs of moisture within the LED lamp housing and if necessary replacing the LED and installing a additional O\-ring and foam gasket to the license plate applique
- [9003846](/bulletins/10223883.md), 2022-10-17, Service bulletin: EQUIPMENT; EXTERIOR LIGHTING. LAMP, License Plate / LAMP, Liftgate If the license plate lamps have moisture or are inop, please replace the full liftgate lamp and/or the license plate lamp as one unit using care not to touch the licence plate lamp.
- [0800822](/bulletins/10222979.md), 2022-10-17, Service bulletin: STRUCTURE; ELECTRICAL SYSTEM; BACK OVER PREVENTION; EXTERIOR LIGHTING. Flash: Body Control Module \(BCM\) Updates This bulletin involves reprogramming the BCM with the latest available software. The customer may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code \(DTC\). When the ambient air temperature sensor voltage goes to 0 volts \(shorted to ground\), the BCM sets a P0073 \- Ambient Air Temperature Sensor Circuit High for this condition. The BCM should display P0072 \- Ambient Air Temperature Sensor Circuit Low instead.
- [0810121](/bulletins/10221337.md), 2022-09-26, Service bulletin: EXTERIOR LIGHTING. License Plate LED Light Inoperative \- Moisture Visible Within the Lens This bulletin involves inspecting the license plate LED lamp for being inoperative or visible signs of moisture within the LED lamp housing and if necessary replacing the LED and installing a foam gasket to the license plate applique. Customers may comment on one or more of the following: License plate LED light is inoperable. Moisture in the license plate lamp housing.
- [9004162](/bulletins/10219996.md), 2022-09-15, Service bulletin: EXTERIOR LIGHTING:TURN SIGNAL:BULBS. SOCKET \(Park/Turn Signal\) For concern of turn signal bulb out, inoperative, not working or dim, please contact Sandeep Tummuri at \(248\) 425\-3419.
- [0810121](/bulletins/10212488.md), 2022-05-31, Service bulletin: EXTERIOR LIGHTING. License Plate LED Light Inoperative \- Moisture Visible Within the Lens This bulletin involves inspecting the license plate LED lamp for being inoperative or visible signs of moisture within the LED lamp housing and if necessary replacing the LED and installing a foam gasket to the license plate applique. Customers may comment on one or more of the following: License plate LED light is inoperable. Moisture in the license plate lamp housing.
- [9004162](/bulletins/10169144.md), 2019-12-16, Service bulletin: EXTERIOR LIGHTING:TURN SIGNAL; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. SOCKET \(Park/Turn Signal\) For concern of turn signal bulb out, inoperative, not working or dim, please contact Sandeep Tummuri at \(248\) 425\-3419.

JSON: [/v1/bulletins/10174101](/v1/bulletins/10174101)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209004099&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10174101&vehicle=Service%20bulletin%209004099)