Service bulletin ITB20-008
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10173591 |
| Published by NHTSA | 2020-04-07 |
| Manufacturer's number | ITB20-008 |
| Manufacturer's date | 2020-03-18 |
| NHTSA component | STRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY |
NHTSA's summary
2019-2020 QX50; RATTLE FROM MOONROOF Refer to the SERVICE PROCEDURE on page 2 if directed here from ITB20-009. IF YOU CONFIRM A rattle type noise is coming from the moonroof in the areas circled in green in Figure 1 AND The rattle goes away after removing the moonroof inner finisher(s). NOTE: The rattle noise may be intermittent and may be heard from one or both sides of the vehicle. ACTION Apply flocking tape to the moonroof inner finisher on both sides of the vehicle.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Glass, wipers and mirrors, Sunroof
| INFINITI QX50 | 2019, 2020 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| ITB19-035 | 2019-12-06. Service bulletin. 2019 QX50; RATTLE NOISE FROM REAR OF FRONT MOONROOF PANEL IF YOU CONFIRM While driving at approximately 10 MPH, a rattle is present from either the right or left rear corner of the front moonroof glass panel, And Occurs only while the moonroof is in the closed position, And The moonroof buffers have been confirmed as being the old style (see Figure 2 and Figure 3 on pages 2 and 3, respectively). ACTION Replace both moonroof glass panel buffers with those from the Parts Information section of this bulletin on page 5. |
|---|---|
| USA 2019 QX50 PG | 2018-09-17. Service bulletin. 2019 QX50 PGF Film Removal ? Supplemental Information This bulletin applies only to vehicles equipped with a panoramic moonroof. What Retailers Should Do: This information applies to 2019 QX50 equipped with a panoramic moonroof only. In reference to bulletin ITB01-024e, there is a clear protective tape on the right and left moonroof trim finishers which also should be removed during the PGF removal process. If this action has not been completed on vehicles in retailer inventory, please perform this action immediately to ensure easy removal and avoid trim damage. Key points: Use a tool that will not scratch the surface of the finishers or surrounding areas of the vehicle to peel the edge of the film back, then remove the film from the entire surface of the right and left trim. |