# Service bulletin S2005000002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10173307
- Published by NHTSA: 2020\-04\-06
- Manufacturer's number: S2005000002
- Manufacturer's date: 2020\-02\-07
- NHTSA component: SERVICE BRAKES

## NHTSA's summary

Pad Contact On Rotor After Brake Service

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10173307-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10173307-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes

## Vehicles listed

- 2018 to 2020 CHRYSLER 300
- 2018 to 2020 DODGE CHALLENGER
- 2018 to 2020 DODGE CHARGER

## Recalls for the same vehicles and component

- [19V758000](/recalls/nhtsa/19V758000.md), 2019-10-24: SERVICE BRAKES; WHEELS; TIRES

## Other bulletins for the same vehicles and component

- [108463](/bulletins/11025727.md), 2025-11-26, Service bulletin: SERVICE BRAKES. PAD KIT \- REAR DISC BRAKE, FRONT DISC BRAKE
- [108464](/bulletins/11025724.md), 2025-11-26, Service bulletin: SERVICE BRAKES. PAD KIT \- REAR DISC BRAKE, FRONT DISC BRAKE
- [S1808000152](/bulletins/10247965.md), 2024-01-02, Service bulletin: SERVICE BRAKES. CEL \(Check Engine Lamp\) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes \(DTCs\) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042\-54 Brake Pedal Missing Calibration
- [S2108000170](/bulletins/10230194.md), 2023-01-17, Service bulletin: PARKING BRAKE. Head unit button stuck DTC code B14DA\-2A
- [1806522](/bulletins/10229175.md), 2023-01-09, Service bulletin: SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; BACK OVER PREVENTION; EXTERIOR LIGHTING. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test \(SLVT\)to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. A noise heard from the drivetrain while stationary and vehicle is inSport/Track modes. Extended engine crank times.
- [1806422](/bulletins/10229173.md), 2023-01-09, Service bulletin: SERVICE BRAKES, HYDRAULIC; BACK OVER PREVENTION; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [1806622](/bulletins/10229172.md), 2023-01-09, Service bulletin: ELECTRICAL SYSTEM; BACK OVER PREVENTION; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [S2208000138RevA](/bulletins/10227712.md), 2022-12-12, Service bulletin: SERVICE BRAKES. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
- [9003756](/bulletins/10224681.md), 2022-10-24, Service bulletin: BACK OVER PREVENTION; AIR BAGS; STEERING; PARKING BRAKE; ELECTRICAL SYSTEM. Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection\-\-\> Check if the sensor is visually OK. \(all the pins are OK\) Check that the Connector is NOT loose \(Sensor must get a voltage from 9V to 16V\) 2. Functional Checks Rain\-\-\> Steering column switch is in auto mode \(sensor is active\) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased \(for example from level 0 to level 1\), as an acknowledgement a single wipe is seen. \(This is not a phantom wipe\) and this single wipe is not seen when the rain sensitivity is decreased \(from higher level to lower level\) Light\-\-\> Steering column switch is in auto mode \(sensor is active\) block the light coming on the sensor from outside of the vehicle \(use a opaque object\), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad \(PN 68224945AA\) instead of replacing the whole sensor.
- [2500320](/bulletins/10224088.md), 2022-10-17, Service bulletin: FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Evaporative Emission Control System \(EVAP\) Purge Line Kinked This bulletin involves inspecting and possibly replacing the EVAP purge valve assembly. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes \(DTCs\) has been set:P0441 \- EVAP Purge System Performance. P0452 \- EVAP Pressure Switch Stuck Closed.

JSON: [/v1/bulletins/10173307](/v1/bulletins/10173307)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20S2005000002&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10173307&vehicle=Service%20bulletin%20S2005000002)