WenmarOpen by Wenmar Pro

Service bulletin PM939 2020 Versa

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10172261
Published by NHTSA2020-03-07
Manufacturer's numberPM939 2020 Versa
Manufacturer's date2020-02-19
NHTSA componentFUEL SYSTEM, GASOLINE

NHTSA's summary

MY20 Versa Quality Hold ***** Dealer Announcement ***** Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to assure that these vehicles, as delivered to our customers, meet our exacting standards and our customers’ expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on eighteen (18) specific MY2020 Versa (N18) vehicles in dealer inventory. The fuel tank may not meet Nissan design specifications. Nissan engineering is investigating this potential issue and will provide the appropriate field action as quickly as possible. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. ***** What Dealers Should Do ***** 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PM939 • - New vehicles in dealer inventory can also be identified using DBS (Sales->Vehicle Inventory, and filter by Open Campaign). • - Refer to NPSB 15-460 for additional information 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this Quality Hold. 3. Nissan will provide an updated status, to include next steps, no later than the week ending February 28, 2020. Thank you for your prompt attention to this matter.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Fuel system

Vehicles listed
NISSAN VERSA2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20V1120002020-02-26. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB22-0262022-06-08. Service bulletin. SERVICE INFORMATION FOR FUEL GAUGE INACCURATE WITH DTCS STORED IN ECM SERVICE INFORMATION If a fuel level sensor has been diagnosed as sending an incorrect level signal, and one or more of the following DTCs are stored in the ECM, do not replace the entire “Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly” (fuel pump assembly). The fuel level sensor can be replaced separately. • P0460 (FUEL LEV SEN SLOSH) • P0461 (FUEL LEVEL SENSOR) • P0462 (FUEL LEVL SEN/CIRC) • P0463 (FUEL LEVL SEN/CIRC) NOTE: Warranty claims referring to fuel level issues that result in the replacement of the entire fuel pump assembly will be charged back.
NTB17-082E2022-03-12. Service bulletin. DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-097J2022-03-12. Service bulletin. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB21-0092021-02-06. Service bulletin. DTC B12A3-72 FOR FUEL PUMP RELAY STUCK OPEN SERVICE INFORMATION DTC B12A3-72 (Fuel Pump Relay Stuck Open) may be stored when the IPDM monitor circuit internally sees 0V to ground at pin #46. This is caused by an internal short to ground in the IPDM or one of the IPDM fuses listed below is open. If B12A3-72 is current or reoccurs after erasing DTCs, inspect the model specific fuse first. If the fuse is not open replace the IPDM. • Altima – Fuse # 58 (page 2) • Kicks – Fuse # 54 (page 3) • Versa – Fuse # 61 (page 4) For additional IPDM diagnostic information refer to the Electronic Service Manual (ESM): Section ELECTRICAL & POWER CONTROL > POWER CONTROL SYSTEM > IPDM E/R. See model specific fuse locations starting on page 2.