# Service bulletin TSB\-13\-13\-002REV

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10172187
- Published by NHTSA: 2020\-03\-18
- Manufacturer's number: TSB\-13\-13\-002REV
- Manufacturer's date: 2013\-03\-19
- NHTSA component: ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

## NHTSA's summary

Improper Secondary Parameter judgement criteria may cause false MIL illumination during 3rd Oxygen Sensor Monitoring \(P0145\). This TSB provides a field fix procedure to address false MIL illumination with DTC P0145 \(Heated oxygen sensor \(3rd\) circuit slow response\) stored in the ECM. This software update optimizes the judgement criteria to minimize false MIL illumination.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10172187-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10172187-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine, Exhaust and emissions

## Trouble codes named

P0145

## Vehicles listed

- 2011 MITSUBISHI LANCER
- 2011 MITSUBISHI LANCER SPORTBACK
- 2011 MITSUBISHI OUTLANDER

## Recalls for the same vehicles and component

- [18V069000](/recalls/nhtsa/18V069000.md), 2018-01-26: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS
- [2014397](/recalls/tc/2014397.md), 2014-09-15: Engine
- [14V562000](/recalls/nhtsa/14V562000.md), 2014-09-12: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS

## Other bulletins for the same vehicles and component

- [TSB\-24\-11\-002](/bulletins/11003535.md), 2024-07-05, Service bulletin: ENGINE. Service Manual Revision \- This Technical Service Bulletin provides additions to the description of special tools used for removal of the drive belt within the Engine Mechanical \(3.0L Engine\) section of the applicable Service Manuals.
- [TSB\-11\-66\-001REV](/bulletins/10233997.md), 2023-04-07, Service bulletin: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This Technical Service Bulletin contains technical information and troubleshooting for the accessory Remote Engine Start system for affected vehicles.
- [TIN\-23\-66\-001](/bulletins/10233994.md), 2023-04-07, Service bulletin: ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This is a Technical Information Notice informing dealers and parts managers about possible causes after a customer complains that the engine will not start while using the remote start system.
- [TSB\-23\-11\-001](/bulletins/10231410.md), 2023-02-07, Service bulletin: ENGINE AND ENGINE COOLING. This TSB provides revisions to the Removal and Installation procedures for the rocker cover due to changes in the quantity of mounting bolts for vehicles equipped with 4B1 series engine. \(Service Manual Revision\)
- [TIN\-21\-13\-001](/bulletins/10191961.md), 2021-05-08, Service bulletin: ENGINE AND ENGINE COOLING. This Technical Information Notice provides additional instructions to dealers when replacing the Valve Cover Gasket due to a customer concern of oil leaking.
- [TIN\-20\-SR\-003](/bulletins/10179672.md), 2020-09-14, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL; EQUIPMENT ADAPTIVE/MOBILITY. This Technical Information Notice was sent to dealers informing that a recall campaign was released on July 22, 2020 \(SR\-20\-003\) for the Crossmember Corrosion.
- [ATIN\-20\-SR\-003\-B](/bulletins/10177373.md), 2020-07-20, Service bulletin: ENGINE; STRUCTURE:FRAME AND MEMBERS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Advanced Technical Information Notice was sent to dealers informing them of the upcoming recall being released for the inside and outside surfaces of the front cross members used on certain vehicles, if exposed long term to snow melt water and anti\-freezing agents, may corrode due to insufficient performance of the rust protection.
- [TSB\-13\-13\-005](/bulletins/10172188.md), 2020-03-18, Service bulletin: PARKING BRAKE:INDICATOR LIGHT; ENGINE AND ENGINE COOLING. Some affected vehicles may display an illuminated Malfunction Indicator Lamp or be hard to start after being parked during sub−freezing weather. Nearby residual EGR gas freezes the Electronic Throttle Valve \(ETV\) at cold ambient temperatures \(approximately 23 F / \-5 C\). The frozen throttle valve causes MIL illumination for P2100 detection. This TSB provides field fix information on hard\-to\-start engine conditions or DTC P2100 detection \(P2100: Disconnection on throttle valve control servo circuit\). New ECM software modifies the EGR intake air activation temperature to avoid freezing the ETV and false P2100 detection.
- [TSB\-13\-13\-001REV](/bulletins/10172186.md), 2020-03-18, Service bulletin: ENGINE AND ENGINE COOLING. This TSB provides a field fix procedure to address false MIL illumination with DTC P0300 \(Random/multiple cylinder misfire detected\) stored in the ECM under the following conditions: 1. During cold engine start, rough or partial clutch operation \(manual transmission only\) may cause powertrain vibration similar to a misfire and cause false MIL illumination. 2. At high engine speeds with low load condition, a CVT downshift can cause powertrain vibration similar to a misfire and cause false MIL illumination. 3. At high engine speeds, improper Misfire Monitoring \(P0300\) threshold values may cause false MIL illumination. New software revises improper Misfire Monitoring \(P0300\) threshold values to false MIL illumination.
- [TSB\-13\-13\-001](/bulletins/10170846.md), 2020-02-11, Service bulletin: POWER TRAIN; ENGINE AND ENGINE COOLING. During cold engine start, rough or partial clutch operation may cause powertrain vibration similar to misfire conditions and cause false MIL illumination. New software revises improper Misfire Monitoring \(P0300\) threshold values to prevent these problems. This TSB provides a field fix procedure to address false MIL illumination with DTC P0300 \(Random/multiple cylinder misfire detected\) stored in the ECM.

JSON: [/v1/bulletins/10172187](/v1/bulletins/10172187)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB-13-13-002REV&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10172187&vehicle=Service%20bulletin%20TSB-13-13-002REV)